mirror of
https://gitea.com/mcereda/oam.git
synced 2026-02-09 05:44:23 +00:00
80 lines
2.4 KiB
Markdown
80 lines
2.4 KiB
Markdown
# Flipper Zero
|
|
|
|
Portable fully open-source and customizable multi-tool for pentesters and geeks in a toy-like body.
|
|
|
|
1. [TL;DR](#tldr)
|
|
1. [Further readings](#further-readings)
|
|
1. [Sources](#sources)
|
|
|
|
## TL;DR
|
|
|
|
| Effect | Hotkey | Notes |
|
|
| ------------- | ---------------------------------------------------------------------------------------------------------------------- | ------------------------ |
|
|
| Power on | Press and hold `BACK` for 3 seconds | |
|
|
| Reboot | Press and hold `LEFT` and `BACK` for 5 seconds | |
|
|
| Hard reboot | Press and hold `BACK` for 30 seconds | Resets the power circuit |
|
|
| Recovery mode | Press and hold `LEFT` and `BACK` for 5 seconds<br/>Release `BACK` and keep holding `LEFT` until the blue LED lights up | |
|
|
|
|
The device will **not** be able to work properly without a microSD card.<br/>
|
|
The card of up to 256 GB is needed to store any data (e.g. keys, cards, remotes, databases). A 4 GB one should be
|
|
sufficient to store all the necessary data.<br/>
|
|
The Flipper Zero may take longer to recognize a microSD card with a higher storage capacity.<br/>
|
|
The device uses a slow, energy-efficient SPI interface that can read data at almost 600 KiB/s, which is sufficient for
|
|
it's tasks.
|
|
|
|
Update the device via the _Flipper Mobile_ app or _qFlipper_.
|
|
|
|
<details>
|
|
<summary>Setup</summary>
|
|
|
|
```sh
|
|
curl -o 'qFlipper.AppImage' 'https://update.flipperzero.one/builds/qFlipper/1.3.3/qFlipper-x86_64-1.3.3.AppImage'
|
|
sudo './qFlipper.AppImage' rules install
|
|
```
|
|
|
|
</details>
|
|
|
|
<!-- Uncomment if used
|
|
<details>
|
|
<summary>Usage</summary>
|
|
|
|
```sh
|
|
```
|
|
|
|
</details>
|
|
-->
|
|
|
|
<!-- Uncomment if used
|
|
<details>
|
|
<summary>Real world use cases</summary>
|
|
|
|
```sh
|
|
```
|
|
|
|
</details>
|
|
-->
|
|
|
|
## Further readings
|
|
|
|
- [Website]
|
|
- [Codebase]
|
|
|
|
### Sources
|
|
|
|
- [Documentation]
|
|
|
|
<!--
|
|
Reference
|
|
═╬═Time══
|
|
-->
|
|
|
|
<!-- In-article sections -->
|
|
<!-- Knowledge base -->
|
|
<!-- Files -->
|
|
<!-- Upstream -->
|
|
[codebase]: https://github.com/flipperdevices
|
|
[documentation]: https://docs.flipper.net/
|
|
[website]: https://flipperzero.one/
|
|
|
|
<!-- Others -->
|