mirror of
https://gitea.com/mcereda/oam.git
synced 2026-02-09 05:44:23 +00:00
2.4 KiB
2.4 KiB
Flipper Zero
Portable fully open-source and customizable multi-tool for pentesters and geeks in a toy-like body.
TL;DR
| Effect | Hotkey | Notes |
|---|---|---|
| Power on | Press and hold BACK for 3 seconds |
|
| Reboot | Press and hold LEFT and BACK for 5 seconds |
|
| Hard reboot | Press and hold BACK for 30 seconds |
Resets the power circuit |
| Recovery mode | Press and hold LEFT and BACK for 5 secondsRelease BACK and keep holding LEFT until the blue LED lights up |
The device will not be able to work properly without a microSD card.
The card of up to 256 GB is needed to store any data (e.g. keys, cards, remotes, databases). A 4 GB one should be
sufficient to store all the necessary data.
The Flipper Zero may take longer to recognize a microSD card with a higher storage capacity.
The device uses a slow, energy-efficient SPI interface that can read data at almost 600 KiB/s, which is sufficient for
it's tasks.
Update the device via the Flipper Mobile app or qFlipper.
Setup
curl -o 'qFlipper.AppImage' 'https://update.flipperzero.one/builds/qFlipper/1.3.3/qFlipper-x86_64-1.3.3.AppImage'
sudo './qFlipper.AppImage' rules install