feat: 增加 PHP 8.3 版本 (#1612)

apps/php8/8.1.29/build/.env

@@ -1,6 +1,6 @@
 CONTAINER_PACKAGE_URL=mirrors.ustc.edu.cn
 
-PHP_VERSION=8.1.27
+PHP_VERSION=8.1.29
 PHP_PHP_CONF_FILE=./php/php.ini
 PHP_FPM_CONF_FILE=./php/php-fpm.conf
 PHP_LOG_DIR=./logs/php
@@ -10,5 +10,5 @@ SOURCE_DIR=./www
 
 TZ=Asia/Shanghai
 DATA_DIR=./data
-IMAGE_NAME=1panel-php:8.1.27
+IMAGE_NAME=1panel-php:8.1.29
 INSTALL_SUPERVISOR=0

apps/php8/8.2.20/build/.env

@@ -1,6 +1,6 @@
 CONTAINER_PACKAGE_URL=mirrors.ustc.edu.cn
 
-PHP_VERSION=8.2.15
+PHP_VERSION=8.2.20
 PHP_PHP_CONF_FILE=./php/php.ini
 PHP_FPM_CONF_FILE=./php/php-fpm.conf
 PHP_LOG_DIR=./logs/php
@@ -10,5 +10,5 @@ SOURCE_DIR=./www
 
 TZ=Asia/Shanghai
 DATA_DIR=./data
-IMAGE_NAME=1panel-php:8.2.15
+IMAGE_NAME=1panel-php:8.2.20
 INSTALL_SUPERVISOR=0

apps/php8/8.3.8/build/.env

@@ -0,0 +1,14 @@
+CONTAINER_PACKAGE_URL=mirrors.ustc.edu.cn
+
+PHP_VERSION=8.3.8
+PHP_PHP_CONF_FILE=./php/php.ini
+PHP_FPM_CONF_FILE=./php/php-fpm.conf
+PHP_LOG_DIR=./logs/php
+PHP_EXTENSIONS=
+
+SOURCE_DIR=./www
+
+TZ=Asia/Shanghai
+DATA_DIR=./data
+IMAGE_NAME=1panel-php:8.3.8
+INSTALL_SUPERVISOR=0

apps/php8/8.3.8/build/config.json

@@ -0,0 +1,134 @@
+{
+  "formFields": [
+    {
+      "type": "select",
+      "multiple": true,
+      "labelZh": "扩展",
+      "labelEn": "Extensions",
+      "default": ["mysqli","pdo_mysql"],
+      "values": [
+        {
+          "label": "opcache",
+          "value": "opcache"
+        },
+        {
+          "label": "memcached",
+          "value": "memcached"
+        },
+        {
+          "label": "memcache",
+          "value": "memcache"
+        },
+        {
+          "label": "redis",
+          "value": "redis"
+        },
+        {
+          "label": "mcrypt",
+          "value": "mcrypt"
+        },
+        {
+          "label": "xdebug",
+          "value": "xdebug"
+        },
+        {
+          "label": "imap",
+          "value": "imap"
+        },
+        {
+          "label": "exif",
+          "value": "exif"
+        },
+        {
+          "label": "intl",
+          "value": "intl"
+        },
+        {
+          "label": "swoole",
+          "value": "swoole"
+        },
+        {
+          "label": "yaf",
+          "value": "yaf"
+        },
+        {
+          "label": "pgsql",
+          "value": "pgsql"
+        },
+        {
+          "label": "pdo_pgsql",
+          "value": "pdo_pgsql"
+        },
+        {
+          "label": "snmp",
+          "value": "snmp"
+        },        {
+          "label": "ldap",
+          "value": "ldap"
+        },
+        {
+          "label": "pspell",
+          "value": "pspell"
+        },
+        {
+          "label": "bz2",
+          "value": "bz2"
+        },
+        {
+          "label": "sysvshm",
+          "value": "sysvshm"
+        },
+        {
+          "label": "calendar",
+          "value": "calendar"
+        },
+        {
+          "label": "gmp",
+          "value": "gmp"
+        },
+        {
+          "label": "sysvmsg",
+          "value": "sysvmsg"
+        },
+        {
+          "label": "igbinary",
+          "value": "igbinary"
+        },
+        {
+          "label": "mysqli",
+          "value": "mysqli"
+        },
+        {
+          "label": "pdo_mysql",
+          "value": "pdo_mysql"
+        },
+        {
+          "label": "mbstring",
+          "value": "mbstring"
+        },
+        {
+          "label": "gd",
+          "value": "gd"
+        },
+        {
+          "label": "ioncube_loader",
+          "value": "ioncube_loader"
+        },
+        {
+          "label": "curl",
+          "value": "curl"
+        },
+        {
+          "label": "sg15",
+          "value": "sourceguardian"
+        },
+        {
+          "label": "imagick",
+          "value": "imagick"
+        }
+      ],
+      "envKey": "PHP_EXTENSIONS",
+      "edit": true
+    }
+  ]
+}

apps/php8/8.3.8/build/docker-compose.yml

@@ -0,0 +1,19 @@
+services:
+  1panel-php:
+    build:
+      context: ./php
+      args:
+        PHP_IMAGE: php:${PHP_VERSION}-fpm-alpine
+        CONTAINER_PACKAGE_URL: ${CONTAINER_PACKAGE_URL}
+        PHP_EXTENSIONS: ${PHP_EXTENSIONS}
+        TZ: ${TZ}
+    image: ${IMAGE_NAME}
+    volumes:
+      - ${SOURCE_DIR}:/www/
+      - ${PHP_PHP_CONF_FILE}:/usr/local/etc/php/php.ini
+      - ${PHP_FPM_CONF_FILE}:/usr/local/etc/php-fpm.d/www.conf
+      - ${PHP_LOG_DIR}:/var/log/php
+      - ${DATA_DIR}/composer:/tmp/composer
+    restart: always
+    cap_add:
+      - SYS_PTRACE

apps/php8/8.3.8/build/php/Dockerfile

@@ -0,0 +1,39 @@
+ARG PHP_IMAGE
+FROM ${PHP_IMAGE}
+
+ARG TZ
+ARG PHP_EXTENSIONS
+ARG CONTAINER_PACKAGE_URL
+
+
+RUN if [ $CONTAINER_PACKAGE_URL ] ; then sed -i "s/dl-cdn.alpinelinux.org/${CONTAINER_PACKAGE_URL}/g" /etc/apk/repositories ; fi
+
+ADD ./extensions/install-php-extensions  /usr/local/bin/
+RUN chmod uga+x /usr/local/bin/install-php-extensions
+
+COPY ./extensions /tmp/extensions
+WORKDIR /tmp/extensions
+RUN chmod +x install.sh \
+    && sh install.sh \
+    && rm -rf /tmp/extensions
+
+
+RUN apk --no-cache add tzdata \
+    && cp "/usr/share/zoneinfo/$TZ" /etc/localtime \
+    && echo "$TZ" > /etc/timezone
+
+# Fix: https://github.com/docker-library/php/issues/240
+RUN apk add gnu-libiconv libstdc++ --no-cache --repository http://${CONTAINER_PACKAGE_URL}/alpine/edge/community/ --allow-untrusted
+ENV LD_PRELOAD /usr/lib/preloadable_libiconv.so php
+
+
+# Install composer and change it's cache home
+RUN curl -o /usr/bin/composer https://mirrors.aliyun.com/composer/composer.phar \
+    && chmod +x /usr/bin/composer
+ENV COMPOSER_HOME=/tmp/composer
+
+# php image's www-data user uid & gid are 82, change them to 1000 (primary user)
+RUN apk --no-cache add shadow && usermod -u 1000 www-data && groupmod -g 1000 www-data
+
+
+WORKDIR /www

apps/php8/8.3.8/build/php/extensions/install-composer.sh

@@ -0,0 +1,16 @@
+#!/bin/sh
+
+# The latest mirror's composer version only support for PHP 7.2.5
+# And if your PHP version is lesser than that, will be download supported version.
+supportLatest=$(php -r "echo version_compare(PHP_VERSION, '7.2.5', '>');")
+
+if [ "$supportLatest" -eq "1" ]; then
+    curl -o /usr/bin/composer https://mirrors.aliyun.com/composer/composer.phar \
+    && chmod +x /usr/bin/composer
+else
+    curl -o /tmp/composer-setup.php https://getcomposer.org/installer  \
+    && php /tmp/composer-setup.php --install-dir=/tmp \
+    && mv /tmp/composer.phar /usr/bin/composer \
+    && chmod +x /usr/bin/composer \
+    && rm -rf /tmp/composer-setup.php
+fi

apps/php8/8.3.8/build/php/extensions/install.sh

@@ -0,0 +1,705 @@
+#!/bin/sh
+
+export MC="-j$(nproc)"
+
+echo
+echo "============================================"
+echo "Install extensions from   : install.sh"
+echo "PHP version               : ${PHP_VERSION}"
+echo "Extra Extensions          : ${PHP_EXTENSIONS}"
+echo "Multicore Compilation     : ${MC}"
+echo "Container package url     : ${CONTAINER_PACKAGE_URL}"
+echo "Work directory            : ${PWD}"
+echo "============================================"
+echo
+
+
+if [ "${PHP_EXTENSIONS}" != "" ]; then
+    apk --update add --no-cache --virtual .build-deps autoconf g++ libtool make curl-dev gettext-dev linux-headers
+fi
+
+
+export EXTENSIONS=",${PHP_EXTENSIONS},"
+
+
+#
+# Check if current php version is greater than or equal to
+# specific version.
+#
+# For example, to check if current php is greater than or
+# equal to PHP 8.0:
+#
+# isPhpVersionGreaterOrEqual 8 0
+#
+# Param 1: Specific PHP Major version
+# Param 2: Specific PHP Minor version
+# Return : 1 if greater than or equal to, 0 if less than
+#
+isPhpVersionGreaterOrEqual()
+ {
+    local PHP_MAJOR_VERSION=$(php -r "echo PHP_MAJOR_VERSION;")
+    local PHP_MINOR_VERSION=$(php -r "echo PHP_MINOR_VERSION;")
+
+    if [[ "$PHP_MAJOR_VERSION" -gt "$1" || "$PHP_MAJOR_VERSION" -eq "$1" && "$PHP_MINOR_VERSION" -ge "$2" ]]; then
+        return 1;
+    else
+        return 0;
+    fi
+}
+
+
+#
+# Install extension from package file(.tgz),
+# For example:
+#
+# installExtensionFromTgz redis-6.0.2
+#
+# Param 1: Package name with version
+# Param 2: enable options
+#
+installExtensionFromTgz()
+{
+    tgzName=$1
+    result=""
+    extensionName="${tgzName%%-*}"
+    shift 1
+    result=$@
+    mkdir ${extensionName}
+    tar -xf ${tgzName}.tgz -C ${extensionName} --strip-components=1
+    ( cd ${extensionName} && phpize && ./configure ${result} && make ${MC} && make install )
+
+    docker-php-ext-enable ${extensionName}
+}
+
+# install use  install-php-extensions
+if [[ -z "${EXTENSIONS##*,ioncube_loader,*}" ]]; then
+    echo "---------- Install ioncube_loader ----------"
+	  install-php-extensions ioncube_loader
+fi
+
+if [[ -z "${EXTENSIONS##*,sourceguardian,*}" ]]; then
+    echo "---------- Install sourceguardian ----------"
+    apk add eudev-libs
+	  install-php-extensions sourceguardian
+fi
+
+if [[ -z "${EXTENSIONS##*,memcached,*}" ]]; then
+    echo "---------- Install memcached ----------"
+	  install-php-extensions memcached
+fi
+
+if [[ -z "${EXTENSIONS##*,ssh2,*}" ]]; then
+    echo "---------- Install ssh2 ----------"
+	  install-php-extensions ssh2
+fi
+# end
+
+
+if [[ -z "${EXTENSIONS##*,pdo_mysql,*}" ]]; then
+    echo "---------- Install pdo_mysql ----------"
+    docker-php-ext-install ${MC} pdo_mysql
+fi
+
+if [[ -z "${EXTENSIONS##*,pcntl,*}" ]]; then
+    echo "---------- Install pcntl ----------"
+	docker-php-ext-install ${MC} pcntl
+fi
+
+if [[ -z "${EXTENSIONS##*,mysqli,*}" ]]; then
+    echo "---------- Install mysqli ----------"
+	docker-php-ext-install ${MC} mysqli
+fi
+
+if [[ -z "${EXTENSIONS##*,mbstring,*}" ]]; then
+    echo "---------- mbstring is installed ----------"
+fi
+
+if [[ -z "${EXTENSIONS##*,exif,*}" ]]; then
+    echo "---------- Install exif ----------"
+	docker-php-ext-install ${MC} exif
+fi
+
+if [[ -z "${EXTENSIONS##*,bcmath,*}" ]]; then
+    echo "---------- Install bcmath ----------"
+	docker-php-ext-install ${MC} bcmath
+fi
+
+if [[ -z "${EXTENSIONS##*,calendar,*}" ]]; then
+    echo "---------- Install calendar ----------"
+	docker-php-ext-install ${MC} calendar
+fi
+
+if [[ -z "${EXTENSIONS##*,zend_test,*}" ]]; then
+    echo "---------- Install zend_test ----------"
+	docker-php-ext-install ${MC} zend_test
+fi
+
+if [[ -z "${EXTENSIONS##*,opcache,*}" ]]; then
+    echo "---------- Install opcache ----------"
+    docker-php-ext-install opcache
+fi
+
+if [[ -z "${EXTENSIONS##*,sockets,*}" ]]; then
+    echo "---------- Install sockets ----------"
+	docker-php-ext-install ${MC} sockets
+fi
+
+if [[ -z "${EXTENSIONS##*,gettext,*}" ]]; then
+    echo "---------- Install gettext ----------"
+    apk --no-cache add gettext-dev
+    docker-php-ext-install ${MC} gettext
+
+fi
+
+if [[ -z "${EXTENSIONS##*,shmop,*}" ]]; then
+    echo "---------- Install shmop ----------"
+	docker-php-ext-install ${MC} shmop
+fi
+
+if [[ -z "${EXTENSIONS##*,sysvmsg,*}" ]]; then
+    echo "---------- Install sysvmsg ----------"
+	docker-php-ext-install ${MC} sysvmsg
+fi
+
+if [[ -z "${EXTENSIONS##*,sysvsem,*}" ]]; then
+    echo "---------- Install sysvsem ----------"
+	docker-php-ext-install ${MC} sysvsem
+fi
+
+if [[ -z "${EXTENSIONS##*,sysvshm,*}" ]]; then
+    echo "---------- Install sysvshm ----------"
+	docker-php-ext-install ${MC} sysvshm
+fi
+
+if [[ -z "${EXTENSIONS##*,pdo_firebird,*}" ]]; then
+    echo "---------- Install pdo_firebird ----------"
+	docker-php-ext-install ${MC} pdo_firebird
+fi
+
+if [[ -z "${EXTENSIONS##*,pdo_dblib,*}" ]]; then
+    echo "---------- Install pdo_dblib ----------"
+	docker-php-ext-install ${MC} pdo_dblib
+fi
+
+if [[ -z "${EXTENSIONS##*,pdo_oci,*}" ]]; then
+    echo "---------- Install pdo_oci ----------"
+	docker-php-ext-install ${MC} pdo_oci
+fi
+
+if [[ -z "${EXTENSIONS##*,pdo_odbc,*}" ]]; then
+    echo "---------- Install pdo_odbc ----------"
+	docker-php-ext-install ${MC} pdo_odbc
+fi
+
+if [[ -z "${EXTENSIONS##*,pdo_pgsql,*}" ]]; then
+    echo "---------- Install pdo_pgsql ----------"
+    apk --no-cache add postgresql-dev \
+    && docker-php-ext-install ${MC} pdo_pgsql
+fi
+
+if [[ -z "${EXTENSIONS##*,pgsql,*}" ]]; then
+    echo "---------- Install pgsql ----------"
+    apk --no-cache add postgresql-dev \
+    && docker-php-ext-install ${MC} pgsql
+fi
+
+if [[ -z "${EXTENSIONS##*,oci8,*}" ]]; then
+    echo "---------- Install oci8 ----------"
+	docker-php-ext-install ${MC} oci8
+fi
+
+if [[ -z "${EXTENSIONS##*,odbc,*}" ]]; then
+    echo "---------- Install odbc ----------"
+	docker-php-ext-install ${MC} odbc
+fi
+
+if [[ -z "${EXTENSIONS##*,dba,*}" ]]; then
+    echo "---------- Install dba ----------"
+	docker-php-ext-install ${MC} dba
+fi
+
+if [[ -z "${EXTENSIONS##*,interbase,*}" ]]; then
+    echo "---------- Install interbase ----------"
+    echo "Alpine linux do not support interbase/firebird!!!"
+	#docker-php-ext-install ${MC} interbase
+fi
+
+if [[ -z "${EXTENSIONS##*,hprose,*}" ]]; then
+    echo "---------- Install hprose ----------"
+    printf "\n" | pecl install hprose
+    docker-php-ext-enable hprose
+fi
+
+if [[ -z "${EXTENSIONS##*,gd,*}" ]]; then
+    echo "---------- Install gd ----------"
+    isPhpVersionGreaterOrEqual 8 0
+
+    if [[ "$?" = "1" ]]; then
+        # "--with-xxx-dir" was removed from php 7.4,
+        # issue: https://github.com/docker-library/php/issues/912
+        options="--with-freetype --with-jpeg --with-webp"
+    else
+        options="--with-gd --with-freetype-dir=/usr/include/ --with-png-dir=/usr/include/ --with-jpeg-dir=/usr/include/ --with-webp-dir=/usr/include/"
+    fi
+
+    apk add --no-cache \
+        freetype \
+        freetype-dev \
+        libpng \
+        libpng-dev \
+        libjpeg-turbo \
+        libjpeg-turbo-dev \
+	libwebp-dev \
+    && docker-php-ext-configure gd ${options} \
+    && docker-php-ext-install ${MC} gd \
+    && apk del \
+        freetype-dev \
+        libpng-dev \
+        libjpeg-turbo-dev
+fi
+
+if [[ -z "${EXTENSIONS##*,yaml,*}" ]]; then
+    echo "---------- Install yaml ----------"
+    apk add --no-cache yaml-dev
+    printf "\n" | pecl install yaml
+    docker-php-ext-enable yaml
+fi
+
+if [[ -z "${EXTENSIONS##*,intl,*}" ]]; then
+    echo "---------- Install intl ----------"
+    apk add --no-cache icu-dev
+    docker-php-ext-install ${MC} intl
+fi
+
+if [[ -z "${EXTENSIONS##*,bz2,*}" ]]; then
+    echo "---------- Install bz2 ----------"
+    apk add --no-cache bzip2-dev
+    docker-php-ext-install ${MC} bz2
+fi
+
+if [[ -z "${EXTENSIONS##*,soap,*}" ]]; then
+    echo "---------- Install soap ----------"
+    apk add --no-cache libxml2-dev
+	docker-php-ext-install ${MC} soap
+fi
+
+if [[ -z "${EXTENSIONS##*,xsl,*}" ]]; then
+    echo "---------- Install xsl ----------"
+	apk add --no-cache libxml2-dev libxslt-dev
+	docker-php-ext-install ${MC} xsl
+fi
+
+if [[ -z "${EXTENSIONS##*,xmlrpc,*}" ]]; then
+    echo "---------- Install xmlrpc ----------"
+	apk add --no-cache libxml2-dev libxslt-dev
+	docker-php-ext-install ${MC} xmlrpc
+fi
+
+if [[ -z "${EXTENSIONS##*,wddx,*}" ]]; then
+    echo "---------- Install wddx ----------"
+	apk add --no-cache libxml2-dev libxslt-dev
+	docker-php-ext-install ${MC} wddx
+fi
+
+if [[ -z "${EXTENSIONS##*,curl,*}" ]]; then
+    echo "---------- curl is installed ----------"
+fi
+
+if [[ -z "${EXTENSIONS##*,readline,*}" ]]; then
+    echo "---------- Install readline ----------"
+	apk add --no-cache readline-dev
+	apk add --no-cache libedit-dev
+	docker-php-ext-install ${MC} readline
+fi
+
+if [[ -z "${EXTENSIONS##*,snmp,*}" ]]; then
+    echo "---------- Install snmp ----------"
+	apk add --no-cache net-snmp-dev
+	docker-php-ext-install ${MC} snmp
+fi
+
+if [[ -z "${EXTENSIONS##*,pspell,*}" ]]; then
+    echo "---------- Install pspell ----------"
+	apk add --no-cache aspell-dev
+	apk add --no-cache aspell-en
+	docker-php-ext-install ${MC} pspell
+fi
+
+if [[ -z "${EXTENSIONS##*,recode,*}" ]]; then
+    echo "---------- Install recode ----------"
+	apk add --no-cache recode-dev
+	docker-php-ext-install ${MC} recode
+fi
+
+if [[ -z "${EXTENSIONS##*,tidy,*}" ]]; then
+    echo "---------- Install tidy ----------"
+	apk add --no-cache tidyhtml-dev
+
+	# Fix: https://github.com/htacg/tidy-html5/issues/235
+	ln -s /usr/include/tidybuffio.h /usr/include/buffio.h
+
+	docker-php-ext-install ${MC} tidy
+fi
+
+if [[ -z "${EXTENSIONS##*,gmp,*}" ]]; then
+    echo "---------- Install gmp ----------"
+	apk add --no-cache gmp-dev
+	docker-php-ext-install ${MC} gmp
+fi
+
+if [[ -z "${EXTENSIONS##*,imap,*}" ]]; then
+    echo "---------- Install imap ----------"
+	apk add --no-cache imap-dev
+    docker-php-ext-configure imap --with-imap --with-imap-ssl
+	docker-php-ext-install ${MC} imap
+fi
+
+if [[ -z "${EXTENSIONS##*,ldap,*}" ]]; then
+    echo "---------- Install ldap ----------"
+	apk add --no-cache ldb-dev
+	apk add --no-cache openldap-dev
+	docker-php-ext-install ${MC} ldap
+fi
+
+if [[ -z "${EXTENSIONS##*,psr,*}" ]]; then
+    echo "---------- Install psr ----------"
+    printf "\n" | pecl install psr
+    docker-php-ext-enable psr
+fi
+
+if [[ -z "${EXTENSIONS##*,imagick,*}" ]]; then
+    echo "---------- Install imagick ----------"
+    apk add --no-cache file-dev
+    apk add --no-cache imagemagick imagemagick-dev
+#    cd imagick-3.7.0 && phpize && ./configure
+#    make 
+#    make install 
+    installExtensionFromTgz imagick-3.7.0
+fi
+
+if [[ -z "${EXTENSIONS##*,rar,*}" ]]; then
+    echo "---------- Install rar ----------"
+    printf "\n" | pecl install rar
+    docker-php-ext-enable rar
+fi
+
+if [[ -z "${EXTENSIONS##*,ast,*}" ]]; then
+    echo "---------- Install ast ----------"
+    printf "\n" | pecl install ast
+    docker-php-ext-enable ast
+fi
+
+if [[ -z "${EXTENSIONS##*,msgpack,*}" ]]; then
+    echo "---------- Install msgpack ----------"
+    printf "\n" | pecl install msgpack
+    docker-php-ext-enable msgpack
+fi
+
+if [[ -z "${EXTENSIONS##*,igbinary,*}" ]]; then
+    echo "---------- Install igbinary ----------"
+    printf "\n" | pecl install igbinary
+    docker-php-ext-enable igbinary
+fi
+
+if [[ -z "${EXTENSIONS##*,protobuf,*}" ]]; then
+    isPhpVersionGreaterOrEqual 8 0
+    if [[ "$?" = "1" ]]; then
+        echo "---------- Install protobuf ----------"
+        printf "\n" | pecl install protobuf
+        docker-php-ext-enable protobuf
+    else
+        echo "yar requires PHP >= 8.0.0, installed version is ${PHP_VERSION}"
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,yac,*}" ]]; then
+    isPhpVersionGreaterOrEqual 8 0
+    if [[ "$?" = "1" ]]; then
+        echo "---------- Install yac ----------"
+        printf "\n" | pecl install yac-2.0.2
+        docker-php-ext-enable yac
+    else
+        echo "yar requires PHP >= 8.0.0, installed version is ${PHP_VERSION}"
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,yar,*}" ]]; then
+    isPhpVersionGreaterOrEqual 8 0
+    if [[ "$?" = "1" ]]; then
+        echo "---------- Install yar ----------"
+        printf "\n" | pecl install yar
+        docker-php-ext-enable yar
+    else
+        echo "yar requires PHP >= 8.0.0, installed version is ${PHP_VERSION}"
+    fi
+
+fi
+
+
+
+if [[ -z "${EXTENSIONS##*,yaconf,*}" ]]; then
+    isPhpVersionGreaterOrEqual 8 0
+    if [[ "$?" = "1" ]]; then
+        echo "---------- Install yaconf ----------"
+        printf "\n" | pecl install yaconf
+        docker-php-ext-enable yaconf
+    else
+        echo "yar requires PHP >= 8.0.0, installed version is ${PHP_VERSION}"
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,seaslog,*}" ]]; then
+    echo "---------- Install seaslog ----------"
+    printf "\n" | pecl install seaslog
+    docker-php-ext-enable seaslog
+fi
+
+if [[ -z "${EXTENSIONS##*,varnish,*}" ]]; then
+    echo "---------- Install varnish ----------"
+	apk add --no-cache varnish-dev
+    printf "\n" | pecl install varnish
+    docker-php-ext-enable varnish
+fi
+
+if [[ -z "${EXTENSIONS##*,pdo_sqlsrv,*}" ]]; then
+    isPhpVersionGreaterOrEqual 8 0
+    if [[ "$?" = "1" ]]; then
+        echo "---------- Install pdo_sqlsrv ----------"
+        apk add --no-cache unixodbc-dev
+        printf "\n" | pecl install pdo_sqlsrv
+        docker-php-ext-enable pdo_sqlsrv
+        curl -o /tmp/msodbcsql17_amd64.apk https://download.microsoft.com/download/e/4/e/e4e67866-dffd-428c-aac7-8d28ddafb39b/msodbcsql17_17.5.2.1-1_amd64.apk
+        apk add --allow-untrusted /tmp/msodbcsql17_amd64.apk
+    else
+        echo "pdo_sqlsrv requires PHP >= 8.0.0, installed version is ${PHP_VERSION}"
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,sqlsrv,*}" ]]; then
+    isPhpVersionGreaterOrEqual 8 0
+    if [[ "$?" = "1" ]]; then
+        echo "---------- Install sqlsrv ----------"
+        install-php-extensions sqlsrv
+    else
+        echo "sqlsrv requires PHP >= 8.0.0, installed version is ${PHP_VERSION}"
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,mcrypt,*}" ]]; then
+    isPhpVersionGreaterOrEqual 8 0
+    if [[ "$?" = "1" ]]; then
+        echo "---------- Install mcrypt ----------"
+        apk add --no-cache libmcrypt-dev libmcrypt re2c
+        printf "\n" |pecl install mcrypt
+        docker-php-ext-enable mcrypt
+    else
+        echo "---------- Install mcrypt ----------"
+        apk add --no-cache libmcrypt-dev \
+        && docker-php-ext-install ${MC} mcrypt
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,mysql,*}" ]]; then
+    isPhpVersionGreaterOrEqual 8 0
+
+    if [[ "$?" = "1" ]]; then
+        echo "---------- mysql was REMOVED from PHP 8.0.0 ----------"
+    else
+        echo "---------- Install mysql ----------"
+        docker-php-ext-install ${MC} mysql
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,sodium,*}" ]]; then
+    isPhpVersionGreaterOrEqual 8 0
+    if [[ "$?" = "1" ]]; then
+        echo
+        echo "Sodium is bundled with PHP from PHP 8.0.0"
+        echo
+    else
+        echo "---------- Install sodium ----------"
+        apk add --no-cache libsodium-dev
+        docker-php-ext-install ${MC} sodium
+	fi
+fi
+
+if [[ -z "${EXTENSIONS##*,amqp,*}" ]]; then
+    echo "---------- Install amqp ----------"
+    apk add --no-cache -U autoconf
+    apk add --no-cache -U gcc
+    apk add --no-cache -U linux-headers
+    apk add --no-cache -U libc-dev
+
+    apk add --no-cache --update --virtual .phpize-deps-configure $PHPIZE_DEPS \
+    && apk add rabbitmq-c-dev \
+    && printf '\n' | pecl install amqp \
+    && docker-php-ext-enable amqp \
+    && apk del .phpize-deps-configure
+
+fi
+
+if [[ -z "${EXTENSIONS##*,redis,*}" ]]; then
+    echo "---------- Install redis ----------"
+    installExtensionFromTgz redis-6.0.2
+fi
+
+if [[ -z "${EXTENSIONS##*,apcu,*}" ]]; then
+    echo "---------- Install apcu ----------"
+    pecl install apcu
+    docker-php-ext-enable apcu
+fi
+
+if [[ -z "${EXTENSIONS##*,memcached,*}" ]]; then
+    echo "---------- Install memcached ----------"
+    apk add --no-cache libmemcached-dev zlib-dev
+    pecl install memcached-3.2.3
+    docker-php-ext-enable memcached
+fi
+
+if [[ -z "${EXTENSIONS##*,memcache,*}" ]]; then
+    echo "---------- Install memcache ----------"
+    pecl install memcache
+    docker-php-ext-enable memcache
+fi
+
+if [[ -z "${EXTENSIONS##*,xdebug,*}" ]]; then
+    echo "---------- Install xdebug ----------"
+    installExtensionFromTgz xdebug-3.2.0
+fi
+
+if [[ -z "${EXTENSIONS##*,event,*}" ]]; then
+    echo "---------- Install event ----------"
+    apk add --no-cache libevent-dev
+    export is_sockets_installed=$(php -r "echo extension_loaded('sockets');")
+
+    if [[ "${is_sockets_installed}" = "" ]]; then
+        echo "---------- event is depend on sockets, install sockets first ----------"
+        docker-php-ext-install sockets
+    fi
+
+    echo "---------- Install event again ----------"
+    mkdir event
+    tar -xf event-3.0.8.tgz -C event --strip-components=1
+    cd event && phpize && ./configure && make  && make install
+
+    docker-php-ext-enable --ini-name event.ini event
+fi
+
+if [[ -z "${EXTENSIONS##*,mongodb,*}" ]]; then
+    echo "---------- Install mongodb ----------"
+    apk add --no-cache openssl-dev
+    installExtensionFromTgz mongodb-1.15.2
+    docker-php-ext-configure mongodb --with-mongodb-ssl=openssl
+    docker-php-ext-enable mongodb
+fi
+
+if [[ -z "${EXTENSIONS##*,yaf,*}" ]]; then
+    echo "---------- Install yaf ----------"
+    pecl install yaf
+    docker-php-ext-enable yaf
+fi
+
+
+if [[ -z "${EXTENSIONS##*,swoole,*}" ]]; then
+    echo "---------- Install swoole ----------"
+   install-php-extensions swoole
+fi
+
+if [[ -z "${EXTENSIONS##*,zip,*}" ]]; then
+    echo "---------- Install zip ----------"
+    # Fix: https://github.com/docker-library/php/issues/797
+    apk add --no-cache libzip-dev
+
+    isPhpVersionGreaterOrEqual 8 0
+    if [[ "$?" != "1" ]]; then
+        docker-php-ext-configure zip --with-libzip=/usr/include
+    fi
+
+	docker-php-ext-install ${MC} zip
+fi
+
+if [[ -z "${EXTENSIONS##*,xhprof,*}" ]]; then
+    echo "---------- Install XHProf ----------"
+    pecl install xhprof
+    docker-php-ext-enable xhprof
+
+fi
+
+if [[ -z "${EXTENSIONS##*,xlswriter,*}" ]]; then
+    echo "---------- Install xlswriter ----------"
+    isPhpVersionGreaterOrEqual 8 0
+
+    if [[ "$?" = "1" ]]; then
+        printf "\n" | pecl install xlswriter
+        docker-php-ext-enable xlswriter
+    else
+        echo "---------- PHP Version>= 8.0----------"
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,rdkafka,*}" ]]; then
+    echo "---------- Install rdkafka ----------"
+    isPhpVersionGreaterOrEqual 8 0
+
+    if [[ "$?" = "1" ]]; then
+        apk add librdkafka-dev
+        printf "\n" | pecl install rdkafka
+        docker-php-ext-enable rdkafka
+    else
+        echo "---------- PHP Version>= 8.0----------"
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,zookeeper,*}" ]]; then
+    echo "---------- Install zookeeper ----------"
+    isPhpVersionGreaterOrEqual 8 0
+
+    if [[ "$?" = "1" ]]; then
+        apk add re2c
+        apk add libzookeeper-dev --repository http://${CONTAINER_PACKAGE_URL}/alpine/edge/testing/
+        printf "\n" | pecl install zookeeper
+        docker-php-ext-enable zookeeper
+    else
+        echo "---------- PHP Version>= 8.0----------"
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,phalcon,*}" ]]; then
+    echo "---------- Install phalcon ----------"
+    isPhpVersionGreaterOrEqual 8 0
+
+    if [[ "$?" = "1" ]]; then
+        printf "\n" | pecl install phalcon
+        docker-php-ext-enable psr
+        docker-php-ext-enable phalcon
+    else
+        echo "---------- PHP Version>= 8.0----------"
+    fi
+fi
+
+if [[ -z "${EXTENSIONS##*,sdebug,*}" ]]; then
+    echo "---------- Install sdebug ----------"
+    isPhpVersionGreaterOrEqual 8 0
+
+    if [[ "$?" = "1" ]]; then
+                curl -SL "https://github.com/swoole/sdebug/archive/sdebug_2_9-beta.tar.gz" -o sdebug.tar.gz \
+             && mkdir -p sdebug \
+             && tar -xf sdebug.tar.gz -C sdebug --strip-components=1 \
+             && rm sdebug.tar.gz \
+             && ( \
+                 cd sdebug \
+                 && phpize \
+                 && ./configure  --enable-xdebug \
+                 && make clean && make && make install \
+             ) \
+             && docker-php-ext-enable xdebug
+    else
+        echo "---------- PHP Version>= 8.0----------"
+    fi
+fi
+
+if [ "${PHP_EXTENSIONS}" != "" ]; then
+#    PHP-Imagick 扩展中有所需的其他依赖项,不进行删除.build-deps 
+#    apk del .build-deps \
+     docker-php-source delete
+fi

apps/php8/8.3.8/build/php/php-fpm.conf

@@ -0,0 +1,423 @@
+; Start a new pool named 'www'.
+; the variable $pool can be used in any directive and will be replaced by the
+; pool name ('www' here)
+[www]
+
+; Per pool prefix
+; It only applies on the following directives:
+; - 'access.log'
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+; - 'chdir'
+; - 'php_values'
+; - 'php_admin_values'
+; When not set, the global prefix (or NONE) applies instead.
+; Note: This directive can also be relative to the global prefix.
+; Default Value: none
+;prefix = /path/to/pools/$pool
+
+; Unix user/group of processes
+; Note: The user is mandatory. If the group is not set, the default user's group
+;       will be used.
+user = www-data
+group = www-data
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
+;                            a specific port;
+;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses
+;                            (IPv6 and IPv4-mapped) on a specific port;
+;   '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = 127.0.0.1:9000
+
+; Set listen(2) backlog.
+; Default Value: 511 (-1 on FreeBSD and OpenBSD)
+;listen.backlog = 511
+
+; Set permissions for unix socket, if one is used. In Linux, read/write
+; permissions must be set in order to allow connections from a web server. Many
+; BSD-derived systems allow connections regardless of permissions.
+; Default Values: user and group are set as the running user
+;                 mode is set to 0660
+;listen.owner = www-data
+;listen.group = www-data
+;listen.mode = 0660
+; When POSIX Access Control Lists are supported you can set them using
+; these options, value is a comma separated list of user/group names.
+; When set, listen.owner and listen.group are ignored
+;listen.acl_users =
+;listen.acl_groups =
+
+; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
+;listen.allowed_clients = 127.0.0.1
+
+; Specify the nice(2) priority to apply to the pool processes (only if set)
+; The value can vary from -19 (highest priority) to 20 (lower priority)
+; Note: - It will only work if the FPM master process is launched as root
+;       - The pool processes will inherit the master process priority
+;         unless it specified otherwise
+; Default Value: no set
+; process.priority = -19
+
+; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
+; or group is differrent than the master process user. It allows to create process
+; core dump and ptrace the process for the pool user.
+; Default Value: no
+; process.dumpable = yes
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+;   static  - a fixed number (pm.max_children) of child processes;
+;   dynamic - the number of child processes are set dynamically based on the
+;             following directives. With this process management, there will be
+;             always at least 1 children.
+;             pm.max_children      - the maximum number of children that can
+;                                    be alive at the same time.
+;             pm.start_servers     - the number of children created on startup.
+;             pm.min_spare_servers - the minimum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is less than this
+;                                    number then some children will be created.
+;             pm.max_spare_servers - the maximum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is greater than this
+;                                    number then some children will be killed.
+;  ondemand - no children are created at startup. Children will be forked when
+;             new requests will connect. The following parameter are used:
+;             pm.max_children           - the maximum number of children that
+;                                         can be alive at the same time.
+;             pm.process_idle_timeout   - The number of seconds after which
+;                                         an idle process will be killed.
+; Note: This value is mandatory.
+pm = dynamic
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI. The below defaults are based on a server without much resources. Don't
+; forget to tweak pm.* to fit your needs.
+; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
+; Note: This value is mandatory.
+pm.max_children = 10
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
+pm.start_servers = 2
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 1
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 3
+
+; The number of seconds after which an idle process will be killed.
+; Note: Used only when pm is set to 'ondemand'
+; Default Value: 10s
+;pm.process_idle_timeout = 10s;
+
+; The number of requests each child process should execute before respawning.
+; This can be useful to work around memory leaks in 3rd party libraries. For
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
+; Default Value: 0
+;pm.max_requests = 500
+
+; The URI to view the FPM status page. If this value is not set, no URI will be
+; recognized as a status page. It shows the following informations:
+;   pool                 - the name of the pool;
+;   process manager      - static, dynamic or ondemand;
+;   start time           - the date and time FPM has started;
+;   start since          - number of seconds since FPM has started;
+;   accepted conn        - the number of request accepted by the pool;
+;   listen queue         - the number of request in the queue of pending
+;                          connections (see backlog in listen(2));
+;   max listen queue     - the maximum number of requests in the queue
+;                          of pending connections since FPM has started;
+;   listen queue len     - the size of the socket queue of pending connections;
+;   idle processes       - the number of idle processes;
+;   active processes     - the number of active processes;
+;   total processes      - the number of idle + active processes;
+;   max active processes - the maximum number of active processes since FPM
+;                          has started;
+;   max children reached - number of times, the process limit has been reached,
+;                          when pm tries to start more children (works only for
+;                          pm 'dynamic' and 'ondemand');
+; Value are updated in real time.
+; Example output:
+;   pool:                 www
+;   process manager:      static
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          62636
+;   accepted conn:        190460
+;   listen queue:         0
+;   max listen queue:     1
+;   listen queue len:     42
+;   idle processes:       4
+;   active processes:     11
+;   total processes:      15
+;   max active processes: 12
+;   max children reached: 0
+;
+; By default the status page output is formatted as text/plain. Passing either
+; 'html', 'xml' or 'json' in the query string will return the corresponding
+; output syntax. Example:
+;   http://www.foo.bar/status
+;   http://www.foo.bar/status?json
+;   http://www.foo.bar/status?html
+;   http://www.foo.bar/status?xml
+;
+; By default the status page only outputs short status. Passing 'full' in the
+; query string will also return status for each pool process.
+; Example:
+;   http://www.foo.bar/status?full
+;   http://www.foo.bar/status?json&full
+;   http://www.foo.bar/status?html&full
+;   http://www.foo.bar/status?xml&full
+; The Full status returns for each process:
+;   pid                  - the PID of the process;
+;   state                - the state of the process (Idle, Running, ...);
+;   start time           - the date and time the process has started;
+;   start since          - the number of seconds since the process has started;
+;   requests             - the number of requests the process has served;
+;   request duration     - the duration in µs of the requests;
+;   request method       - the request method (GET, POST, ...);
+;   request URI          - the request URI with the query string;
+;   content length       - the content length of the request (only with POST);
+;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
+;   script               - the main script called (or '-' if not set);
+;   last request cpu     - the %cpu the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because CPU calculation is done when the request
+;                          processing has terminated;
+;   last request memory  - the max amount of memory the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because memory calculation is done when the request
+;                          processing has terminated;
+; If the process is in Idle state, then informations are related to the
+; last request the process has served. Otherwise informations are related to
+; the current request being served.
+; Example output:
+;   ************************
+;   pid:                  31330
+;   state:                Running
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          63087
+;   requests:             12808
+;   request duration:     1250261
+;   request method:       GET
+;   request URI:          /test_mem.php?N=10000
+;   content length:       0
+;   user:                 -
+;   script:               /home/fat/web/docs/php/test_mem.php
+;   last request cpu:     0.00
+;   last request memory:  0
+;
+; Note: There is a real-time FPM status monitoring sample web page available
+;       It's available in: /usr/local/share/php/fpm/status.html
+;
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set
+;pm.status_path = /status
+
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
+; URI will be recognized as a ping page. This could be used to test from outside
+; that FPM is alive and responding, or to
+; - create a graph of FPM availability (rrd or such);
+; - remove a server from a group if it is not responding (load balancing);
+; - trigger alerts for the operating team (24/7).
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set
+;ping.path = /ping
+
+; This directive may be used to customize the response of a ping request. The
+; response is formatted as text/plain with a 200 response code.
+; Default Value: pong
+;ping.response = pong
+
+; The access log file
+; Default: not set
+;access.log = log/$pool.access.log
+
+; The access log format.
+; The following syntax is allowed
+;  %%: the '%' character
+;  %C: %CPU used by the request
+;      it can accept the following format:
+;      - %{user}C for user CPU only
+;      - %{system}C for system CPU only
+;      - %{total}C  for user + system CPU (default)
+;  %d: time taken to serve the request
+;      it can accept the following format:
+;      - %{seconds}d (default)
+;      - %{miliseconds}d
+;      - %{mili}d
+;      - %{microseconds}d
+;      - %{micro}d
+;  %e: an environment variable (same as $_ENV or $_SERVER)
+;      it must be associated with embraces to specify the name of the env
+;      variable. Some exemples:
+;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
+;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
+;  %f: script filename
+;  %l: content-length of the request (for POST request only)
+;  %m: request method
+;  %M: peak of memory allocated by PHP
+;      it can accept the following format:
+;      - %{bytes}M (default)
+;      - %{kilobytes}M
+;      - %{kilo}M
+;      - %{megabytes}M
+;      - %{mega}M
+;  %n: pool name
+;  %o: output header
+;      it must be associated with embraces to specify the name of the header:
+;      - %{Content-Type}o
+;      - %{X-Powered-By}o
+;      - %{Transfert-Encoding}o
+;      - ....
+;  %p: PID of the child that serviced the request
+;  %P: PID of the parent of the child that serviced the request
+;  %q: the query string
+;  %Q: the '?' character if query string exists
+;  %r: the request URI (without the query string, see %q and %Q)
+;  %R: remote IP address
+;  %s: status (response code)
+;  %t: server time the request was received
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
+;  %T: time the log has been written (the request has finished)
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
+;  %u: remote user
+;
+; Default: "%R - %u %t \"%m %r\" %s"
+;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
+
+; The log file for slow requests
+; Default Value: not set
+; Note: slowlog is mandatory if request_slowlog_timeout is set
+slowlog = /var/log/php/fpm.slow.log
+
+; The timeout for serving a single request after which a PHP backtrace will be
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+request_slowlog_timeout = 3
+
+; Depth of slow log stack trace.
+; Default Value: 20
+;request_slowlog_trace_depth = 20
+
+; The timeout for serving a single request after which the worker process will
+; be killed. This option should be used when the 'max_execution_time' ini option
+; does not stop script execution for some reason. A value of '0' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_terminate_timeout = 0
+
+; Set open file descriptor rlimit.
+; Default Value: system defined value
+;rlimit_files = 1024
+
+; Set max core size rlimit.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+
+; Chroot to this directory at the start. This value must be defined as an
+; absolute path. When this value is not set, chroot is not used.
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
+; of its subdirectories. If the pool prefix is not set, the global prefix
+; will be used instead.
+; Note: chrooting is a great security feature and should be used whenever
+;       possible. However, all PHP paths will be relative to the chroot
+;       (error_log, sessions.save_path, ...).
+; Default Value: not set
+;chroot =
+
+; Chdir to this directory at the start.
+; Note: relative path can be used.
+; Default Value: current directory or / when chroot
+;chdir = /var/www
+
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
+; stderr will be redirected to /dev/null according to FastCGI specs.
+; Note: on highloaded environement, this can cause some delay in the page
+; process time (several ms).
+; Default Value: no
+catch_workers_output = yes
+
+; Clear environment in FPM workers
+; Prevents arbitrary environment variables from reaching FPM worker processes
+; by clearing the environment in workers before env vars specified in this
+; pool configuration are added.
+; Setting to "no" will make all environment variables available to PHP code
+; via getenv(), $_ENV and $_SERVER.
+; Default Value: yes
+;clear_env = no
+
+; Limits the extensions of the main script FPM will allow to parse. This can
+; prevent configuration mistakes on the web server side. You should only limit
+; FPM to .php extensions to prevent malicious users to use other extensions to
+; execute php code.
+; Note: set an empty value to allow all extensions.
+; Default Value: .php
+;security.limit_extensions = .php .php3 .php4 .php5 .php7
+
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
+;env[PATH] = /usr/local/bin:/usr/bin:/bin
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+
+; Additional php.ini defines, specific to this pool of workers. These settings
+; overwrite the values previously defined in the php.ini. The directives are the
+; same as the PHP SAPI:
+;   php_value/php_flag             - you can set classic ini defines which can
+;                                    be overwritten from PHP call 'ini_set'.
+;   php_admin_value/php_admin_flag - these directives won't be overwritten by
+;                                     PHP call 'ini_set'
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
+
+; Defining 'extension' will load the corresponding shared extension from
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
+; overwrite previously defined php.ini values, but will append the new value
+; instead.
+
+; Note: path INI options can be relative and will be expanded with the prefix
+; (pool, global or /usr/local)
+
+; Default Value: nothing is defined by default except the values in php.ini and
+;                specified at startup with the -d argument
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
+;php_flag[display_errors] = off
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M

apps/php8/8.3.8/conf/php-fpm.conf

@@ -0,0 +1,423 @@
+; Start a new pool named 'www'.
+; the variable $pool can be used in any directive and will be replaced by the
+; pool name ('www' here)
+[www]
+
+; Per pool prefix
+; It only applies on the following directives:
+; - 'access.log'
+; - 'slowlog'
+; - 'listen' (unixsocket)
+; - 'chroot'
+; - 'chdir'
+; - 'php_values'
+; - 'php_admin_values'
+; When not set, the global prefix (or NONE) applies instead.
+; Note: This directive can also be relative to the global prefix.
+; Default Value: none
+;prefix = /path/to/pools/$pool
+
+; Unix user/group of processes
+; Note: The user is mandatory. If the group is not set, the default user's group
+;       will be used.
+user = www-data
+group = www-data
+
+; The address on which to accept FastCGI requests.
+; Valid syntaxes are:
+;   'ip.add.re.ss:port'    - to listen on a TCP socket to a specific IPv4 address on
+;                            a specific port;
+;   '[ip:6:addr:ess]:port' - to listen on a TCP socket to a specific IPv6 address on
+;                            a specific port;
+;   'port'                 - to listen on a TCP socket to all addresses
+;                            (IPv6 and IPv4-mapped) on a specific port;
+;   '/path/to/unix/socket' - to listen on a unix socket.
+; Note: This value is mandatory.
+listen = 127.0.0.1:9000
+
+; Set listen(2) backlog.
+; Default Value: 511 (-1 on FreeBSD and OpenBSD)
+;listen.backlog = 511
+
+; Set permissions for unix socket, if one is used. In Linux, read/write
+; permissions must be set in order to allow connections from a web server. Many
+; BSD-derived systems allow connections regardless of permissions.
+; Default Values: user and group are set as the running user
+;                 mode is set to 0660
+;listen.owner = www-data
+;listen.group = www-data
+;listen.mode = 0660
+; When POSIX Access Control Lists are supported you can set them using
+; these options, value is a comma separated list of user/group names.
+; When set, listen.owner and listen.group are ignored
+;listen.acl_users =
+;listen.acl_groups =
+
+; List of addresses (IPv4/IPv6) of FastCGI clients which are allowed to connect.
+; Equivalent to the FCGI_WEB_SERVER_ADDRS environment variable in the original
+; PHP FCGI (5.2.2+). Makes sense only with a tcp listening socket. Each address
+; must be separated by a comma. If this value is left blank, connections will be
+; accepted from any ip address.
+; Default Value: any
+;listen.allowed_clients = 127.0.0.1
+
+; Specify the nice(2) priority to apply to the pool processes (only if set)
+; The value can vary from -19 (highest priority) to 20 (lower priority)
+; Note: - It will only work if the FPM master process is launched as root
+;       - The pool processes will inherit the master process priority
+;         unless it specified otherwise
+; Default Value: no set
+; process.priority = -19
+
+; Set the process dumpable flag (PR_SET_DUMPABLE prctl) even if the process user
+; or group is differrent than the master process user. It allows to create process
+; core dump and ptrace the process for the pool user.
+; Default Value: no
+; process.dumpable = yes
+
+; Choose how the process manager will control the number of child processes.
+; Possible Values:
+;   static  - a fixed number (pm.max_children) of child processes;
+;   dynamic - the number of child processes are set dynamically based on the
+;             following directives. With this process management, there will be
+;             always at least 1 children.
+;             pm.max_children      - the maximum number of children that can
+;                                    be alive at the same time.
+;             pm.start_servers     - the number of children created on startup.
+;             pm.min_spare_servers - the minimum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is less than this
+;                                    number then some children will be created.
+;             pm.max_spare_servers - the maximum number of children in 'idle'
+;                                    state (waiting to process). If the number
+;                                    of 'idle' processes is greater than this
+;                                    number then some children will be killed.
+;  ondemand - no children are created at startup. Children will be forked when
+;             new requests will connect. The following parameter are used:
+;             pm.max_children           - the maximum number of children that
+;                                         can be alive at the same time.
+;             pm.process_idle_timeout   - The number of seconds after which
+;                                         an idle process will be killed.
+; Note: This value is mandatory.
+pm = dynamic
+
+; The number of child processes to be created when pm is set to 'static' and the
+; maximum number of child processes when pm is set to 'dynamic' or 'ondemand'.
+; This value sets the limit on the number of simultaneous requests that will be
+; served. Equivalent to the ApacheMaxClients directive with mpm_prefork.
+; Equivalent to the PHP_FCGI_CHILDREN environment variable in the original PHP
+; CGI. The below defaults are based on a server without much resources. Don't
+; forget to tweak pm.* to fit your needs.
+; Note: Used when pm is set to 'static', 'dynamic' or 'ondemand'
+; Note: This value is mandatory.
+pm.max_children = 10
+
+; The number of child processes created on startup.
+; Note: Used only when pm is set to 'dynamic'
+; Default Value: min_spare_servers + (max_spare_servers - min_spare_servers) / 2
+pm.start_servers = 2
+
+; The desired minimum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.min_spare_servers = 1
+
+; The desired maximum number of idle server processes.
+; Note: Used only when pm is set to 'dynamic'
+; Note: Mandatory when pm is set to 'dynamic'
+pm.max_spare_servers = 3
+
+; The number of seconds after which an idle process will be killed.
+; Note: Used only when pm is set to 'ondemand'
+; Default Value: 10s
+;pm.process_idle_timeout = 10s;
+
+; The number of requests each child process should execute before respawning.
+; This can be useful to work around memory leaks in 3rd party libraries. For
+; endless request processing specify '0'. Equivalent to PHP_FCGI_MAX_REQUESTS.
+; Default Value: 0
+;pm.max_requests = 500
+
+; The URI to view the FPM status page. If this value is not set, no URI will be
+; recognized as a status page. It shows the following informations:
+;   pool                 - the name of the pool;
+;   process manager      - static, dynamic or ondemand;
+;   start time           - the date and time FPM has started;
+;   start since          - number of seconds since FPM has started;
+;   accepted conn        - the number of request accepted by the pool;
+;   listen queue         - the number of request in the queue of pending
+;                          connections (see backlog in listen(2));
+;   max listen queue     - the maximum number of requests in the queue
+;                          of pending connections since FPM has started;
+;   listen queue len     - the size of the socket queue of pending connections;
+;   idle processes       - the number of idle processes;
+;   active processes     - the number of active processes;
+;   total processes      - the number of idle + active processes;
+;   max active processes - the maximum number of active processes since FPM
+;                          has started;
+;   max children reached - number of times, the process limit has been reached,
+;                          when pm tries to start more children (works only for
+;                          pm 'dynamic' and 'ondemand');
+; Value are updated in real time.
+; Example output:
+;   pool:                 www
+;   process manager:      static
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          62636
+;   accepted conn:        190460
+;   listen queue:         0
+;   max listen queue:     1
+;   listen queue len:     42
+;   idle processes:       4
+;   active processes:     11
+;   total processes:      15
+;   max active processes: 12
+;   max children reached: 0
+;
+; By default the status page output is formatted as text/plain. Passing either
+; 'html', 'xml' or 'json' in the query string will return the corresponding
+; output syntax. Example:
+;   http://www.foo.bar/status
+;   http://www.foo.bar/status?json
+;   http://www.foo.bar/status?html
+;   http://www.foo.bar/status?xml
+;
+; By default the status page only outputs short status. Passing 'full' in the
+; query string will also return status for each pool process.
+; Example:
+;   http://www.foo.bar/status?full
+;   http://www.foo.bar/status?json&full
+;   http://www.foo.bar/status?html&full
+;   http://www.foo.bar/status?xml&full
+; The Full status returns for each process:
+;   pid                  - the PID of the process;
+;   state                - the state of the process (Idle, Running, ...);
+;   start time           - the date and time the process has started;
+;   start since          - the number of seconds since the process has started;
+;   requests             - the number of requests the process has served;
+;   request duration     - the duration in µs of the requests;
+;   request method       - the request method (GET, POST, ...);
+;   request URI          - the request URI with the query string;
+;   content length       - the content length of the request (only with POST);
+;   user                 - the user (PHP_AUTH_USER) (or '-' if not set);
+;   script               - the main script called (or '-' if not set);
+;   last request cpu     - the %cpu the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because CPU calculation is done when the request
+;                          processing has terminated;
+;   last request memory  - the max amount of memory the last request consumed
+;                          it's always 0 if the process is not in Idle state
+;                          because memory calculation is done when the request
+;                          processing has terminated;
+; If the process is in Idle state, then informations are related to the
+; last request the process has served. Otherwise informations are related to
+; the current request being served.
+; Example output:
+;   ************************
+;   pid:                  31330
+;   state:                Running
+;   start time:           01/Jul/2011:17:53:49 +0200
+;   start since:          63087
+;   requests:             12808
+;   request duration:     1250261
+;   request method:       GET
+;   request URI:          /test_mem.php?N=10000
+;   content length:       0
+;   user:                 -
+;   script:               /home/fat/web/docs/php/test_mem.php
+;   last request cpu:     0.00
+;   last request memory:  0
+;
+; Note: There is a real-time FPM status monitoring sample web page available
+;       It's available in: /usr/local/share/php/fpm/status.html
+;
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set
+;pm.status_path = /status
+
+; The ping URI to call the monitoring page of FPM. If this value is not set, no
+; URI will be recognized as a ping page. This could be used to test from outside
+; that FPM is alive and responding, or to
+; - create a graph of FPM availability (rrd or such);
+; - remove a server from a group if it is not responding (load balancing);
+; - trigger alerts for the operating team (24/7).
+; Note: The value must start with a leading slash (/). The value can be
+;       anything, but it may not be a good idea to use the .php extension or it
+;       may conflict with a real PHP file.
+; Default Value: not set
+;ping.path = /ping
+
+; This directive may be used to customize the response of a ping request. The
+; response is formatted as text/plain with a 200 response code.
+; Default Value: pong
+;ping.response = pong
+
+; The access log file
+; Default: not set
+;access.log = log/$pool.access.log
+
+; The access log format.
+; The following syntax is allowed
+;  %%: the '%' character
+;  %C: %CPU used by the request
+;      it can accept the following format:
+;      - %{user}C for user CPU only
+;      - %{system}C for system CPU only
+;      - %{total}C  for user + system CPU (default)
+;  %d: time taken to serve the request
+;      it can accept the following format:
+;      - %{seconds}d (default)
+;      - %{miliseconds}d
+;      - %{mili}d
+;      - %{microseconds}d
+;      - %{micro}d
+;  %e: an environment variable (same as $_ENV or $_SERVER)
+;      it must be associated with embraces to specify the name of the env
+;      variable. Some exemples:
+;      - server specifics like: %{REQUEST_METHOD}e or %{SERVER_PROTOCOL}e
+;      - HTTP headers like: %{HTTP_HOST}e or %{HTTP_USER_AGENT}e
+;  %f: script filename
+;  %l: content-length of the request (for POST request only)
+;  %m: request method
+;  %M: peak of memory allocated by PHP
+;      it can accept the following format:
+;      - %{bytes}M (default)
+;      - %{kilobytes}M
+;      - %{kilo}M
+;      - %{megabytes}M
+;      - %{mega}M
+;  %n: pool name
+;  %o: output header
+;      it must be associated with embraces to specify the name of the header:
+;      - %{Content-Type}o
+;      - %{X-Powered-By}o
+;      - %{Transfert-Encoding}o
+;      - ....
+;  %p: PID of the child that serviced the request
+;  %P: PID of the parent of the child that serviced the request
+;  %q: the query string
+;  %Q: the '?' character if query string exists
+;  %r: the request URI (without the query string, see %q and %Q)
+;  %R: remote IP address
+;  %s: status (response code)
+;  %t: server time the request was received
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
+;  %T: time the log has been written (the request has finished)
+;      it can accept a strftime(3) format:
+;      %d/%b/%Y:%H:%M:%S %z (default)
+;      The strftime(3) format must be encapsuled in a %{<strftime_format>}t tag
+;      e.g. for a ISO8601 formatted timestring, use: %{%Y-%m-%dT%H:%M:%S%z}t
+;  %u: remote user
+;
+; Default: "%R - %u %t \"%m %r\" %s"
+;access.format = "%R - %u %t \"%m %r%Q%q\" %s %f %{mili}d %{kilo}M %C%%"
+
+; The log file for slow requests
+; Default Value: not set
+; Note: slowlog is mandatory if request_slowlog_timeout is set
+slowlog = /var/log/php/fpm.slow.log
+
+; The timeout for serving a single request after which a PHP backtrace will be
+; dumped to the 'slowlog' file. A value of '0s' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+request_slowlog_timeout = 3
+
+; Depth of slow log stack trace.
+; Default Value: 20
+;request_slowlog_trace_depth = 20
+
+; The timeout for serving a single request after which the worker process will
+; be killed. This option should be used when the 'max_execution_time' ini option
+; does not stop script execution for some reason. A value of '0' means 'off'.
+; Available units: s(econds)(default), m(inutes), h(ours), or d(ays)
+; Default Value: 0
+;request_terminate_timeout = 0
+
+; Set open file descriptor rlimit.
+; Default Value: system defined value
+;rlimit_files = 1024
+
+; Set max core size rlimit.
+; Possible Values: 'unlimited' or an integer greater or equal to 0
+; Default Value: system defined value
+;rlimit_core = 0
+
+; Chroot to this directory at the start. This value must be defined as an
+; absolute path. When this value is not set, chroot is not used.
+; Note: you can prefix with '$prefix' to chroot to the pool prefix or one
+; of its subdirectories. If the pool prefix is not set, the global prefix
+; will be used instead.
+; Note: chrooting is a great security feature and should be used whenever
+;       possible. However, all PHP paths will be relative to the chroot
+;       (error_log, sessions.save_path, ...).
+; Default Value: not set
+;chroot =
+
+; Chdir to this directory at the start.
+; Note: relative path can be used.
+; Default Value: current directory or / when chroot
+;chdir = /var/www
+
+; Redirect worker stdout and stderr into main error log. If not set, stdout and
+; stderr will be redirected to /dev/null according to FastCGI specs.
+; Note: on highloaded environement, this can cause some delay in the page
+; process time (several ms).
+; Default Value: no
+catch_workers_output = yes
+
+; Clear environment in FPM workers
+; Prevents arbitrary environment variables from reaching FPM worker processes
+; by clearing the environment in workers before env vars specified in this
+; pool configuration are added.
+; Setting to "no" will make all environment variables available to PHP code
+; via getenv(), $_ENV and $_SERVER.
+; Default Value: yes
+;clear_env = no
+
+; Limits the extensions of the main script FPM will allow to parse. This can
+; prevent configuration mistakes on the web server side. You should only limit
+; FPM to .php extensions to prevent malicious users to use other extensions to
+; execute php code.
+; Note: set an empty value to allow all extensions.
+; Default Value: .php
+;security.limit_extensions = .php .php3 .php4 .php5 .php7
+
+; Pass environment variables like LD_LIBRARY_PATH. All $VARIABLEs are taken from
+; the current environment.
+; Default Value: clean env
+;env[HOSTNAME] = $HOSTNAME
+;env[PATH] = /usr/local/bin:/usr/bin:/bin
+;env[TMP] = /tmp
+;env[TMPDIR] = /tmp
+;env[TEMP] = /tmp
+
+; Additional php.ini defines, specific to this pool of workers. These settings
+; overwrite the values previously defined in the php.ini. The directives are the
+; same as the PHP SAPI:
+;   php_value/php_flag             - you can set classic ini defines which can
+;                                    be overwritten from PHP call 'ini_set'.
+;   php_admin_value/php_admin_flag - these directives won't be overwritten by
+;                                     PHP call 'ini_set'
+; For php_*flag, valid values are on, off, 1, 0, true, false, yes or no.
+
+; Defining 'extension' will load the corresponding shared extension from
+; extension_dir. Defining 'disable_functions' or 'disable_classes' will not
+; overwrite previously defined php.ini values, but will append the new value
+; instead.
+
+; Note: path INI options can be relative and will be expanded with the prefix
+; (pool, global or /usr/local)
+
+; Default Value: nothing is defined by default except the values in php.ini and
+;                specified at startup with the -d argument
+;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f www@my.domain.com
+;php_flag[display_errors] = off
+;php_admin_value[error_log] = /var/log/fpm-php.www.log
+;php_admin_flag[log_errors] = on
+;php_admin_value[memory_limit] = 32M

apps/php8/8.3.8/data.yml

@@ -0,0 +1,9 @@
+additionalProperties:
+    formFields:
+        - default: 9000
+          envKey: PANEL_APP_PORT_HTTP
+          labelEn: PHP-FPM Port
+          labelZh: PHP-FPM 端口
+          required: true
+          rule: paramPort
+          type: number

apps/php8/8.3.8/docker-compose.yml

@@ -0,0 +1,21 @@
+services:
+  php:
+    image: ${IMAGE_NAME}
+    container_name: ${CONTAINER_NAME}
+    restart: always
+    networks:
+      - 1panel-network
+    volumes:
+      - ${PANEL_WEBSITE_DIR}:/www/
+      - ./conf/php.ini:/usr/local/etc/php/php.ini
+      - ./conf/php-fpm.conf:/usr/local/etc/php-fpm.d/www.conf
+      - ./log:/var/log/php
+      - ./composer:/tmp/composer
+      - ./extensions:/php/extensions
+    ports:
+      - 127.0.0.1:${PANEL_APP_PORT_HTTP}:9000
+    labels:
+      createdBy: "Apps"
+networks:
+  1panel-network:
+    external: true