# Elastic Block Store Persistent [block storage][what is block storage?] for [EC2 Instances][ec2]. 1. [TL;DR](#tldr) 1. [Volume types](#volume-types) 1. [Snapshots](#snapshots) 1. [Encryption](#encryption) 1. [Operations](#operations) 1. [Increase disks' size](#increase-disks-size) 1. [Migrate `gp2` volumes to `gp3`](#migrate-gp2-volumes-to-gp3) 1. [Further readings](#further-readings) 1. [Sources](#sources) ## TL;DR
Real world use cases ```sh # Clean up unused volumes. aws ec2 describe-volumes --output 'text' --filters 'Name=status,Values=available' \ --query "Volumes[?CreateTime<'2018-03-31'].VolumeId" \ | xargs -pn '1' aws ec2 delete-volume --volume-id # Check state of snapshots. aws ec2 describe-snapshots --snapshot-ids 'snap-0123456789abcdef0' \ --query 'Snapshots[].{"State": State,"Progress": Progress}' --output 'yaml' # Wait for snapshots to finish. aws ec2 wait snapshot-completed --snapshot-ids 'snap-0123456789abcdef0' ```
Every EBS volume is local to, and available in, a single Availability Zone. Multiple EBS volumes can be attached to a single instance as long as both the volumes and the instance are in the same Availability Zone. Depending on the volume and instance types, multiple instances can mount a single volume at the same time. Volumes can have their size **increased**, but **not** reduced.
The volumes' filesystem is **not** automatically extended during the change in size, and **must** be [extended manually][Extend the file system after resizing an EBS volume] to take advantage of the change in size.
Linux-based instances should™ be able to take care of that automatically after reboot. Volume costs depend on its type, provisioned size, IOPS and throughput.
Volumes are billed per-second increments, with a 60-seconds minimum period.
Refer [Amazon EBS pricing] EBS volumes attached to instances based on the Nitro system are exposed as NVMe devices. Usage monitoring is available via instance-level metrics on CloudWatch per operations (`EBSReadOps` and `EBSWriteOps`) and bytes transferred (`EBSReadBytes` and `EBSWriteBytes`). [Instances built on the AWS Nitro system] (_EBS-Optimized_) are capable of bursting performance.
Instances from `medium` to `4xlarge` provide burst balance metrics to give information about the percentage of I/O and bytes credits remaining in the respective burst buckets: - `EBSIOBalance%` monitors the instance's I/O burst bucket. - `EBSByteBalance%` monitors the instance's byte burst bucket. Large block workloads usually do not drive enough IOPS to deplete `EBSIOBalance%`, depleting `EBSByteBalance%` instead.
Small block workloads usually drive higher IOPS than bytes/second, dropping `EBSIOBalance%` faster than `EBSByteBalance%`. Instances can drive EBS burst performance as long as `EBSIOBalance%` and `EBSByteBalance%` are above 0%.
When the I/O activity is below the baseline rate, the burst buckets refill. The refill rate for burst buckets is the difference between the baseline rate and the I/O activity.
In addition, burst buckets are topped off every 24 hours, allowing instances to have burst performance available for at least 30 minutes per day. Refer [Amazon EBS-optimized instance types] for details about instances performances.
Refer [Improving application performance and reducing costs with Amazon EBS-Optimized Instance burst capability] for details about EBS balances. ## Volume types Refer [Amazon EBS volume types]. | | `gp3` | `gp2` | `io2` | `io1` | `st1` | `sc1` | | ------------------- | ------------------------------------------------ | -------------- | ----------------- | ----------------- | ---------------- | ---------------- | | Class | SSD | SSD | SSD | SSD | HDD | HDD | | Annual failure rate | 0.1% - 0.2% | 0.1% - 0.2% | 0.001% | 0.1% - 0.2% | 0.1% - 0.2% | 0.1% - 0.2% | | Size | 1 GiB - 16 TiB | 1 GiB - 16 TiB | 4 GiB - 64 TiB | 4 GiB - 16 TiB | 125 GiB - 16 TiB | 125 GiB - 16 TiB | | Max IOPS | 16,000 | 16,000 | 256,000 | 64,000 | 500 | 250 | | Max throughput | 1,000 MiB/s | 250 MiB/s | 4,000 MiB/s | 1,000 MiB/s | 500 MiB/s | 250 MiB/s | | Multi-attach | No | No | Yes | Yes | No | No | | NVMe reservations | No | No | Yes | No | No | No | | Bootable | Yes | Yes | Yes | Yes | No | No | | Pricing | Per-GB + Per-IOPS over 3,000 + Per-MB/s over 125 | Per-GB | Per-GB + Per-IOPS | Per-GB + Per-IOPS | Per-GB | Per-GB | Billing is per-second increments, with a 60-seconds minimum period. Pricing examples:
gp3, 200 GB, 3000 IOPS, 512 MiB/s, for 69h 54m 34s in a 30d month in Ireland ```plaintext Regional price (storage): $0.088/GB/month Regional price (IOPS): $0.0055/IOPS/month over 3000 Regional price (throughput): $0.044/MB/s/month over 125 Seconds in a 30d month: 60s * 60m * 24h * 30d = 2592000s Seconds of actual usage: 34s + ( 60s * 54m ) + ( 60s * 60m * 69h ) = 34s + 3240s + 248400s = 251674s Storage costs: 200GB * $0.088/GB * ( 251674s / 2592000s ) = 200 * $0.088 * 0.09709645062 = $1.71 IOPS costs: ( 3000 - 3000 )IOPS * $0.0055/IOPS * ( 251674s / 2592000s ) = 0 * $0.0055 * 0.09709645062 = $0.00 Throughput costs: ( 512 - 125 )MB/s * $0.044/MB/s * ( 251674s / 2592000s ) = 387 * $0.044 * 0.09709645062 = $1.66 Total: $1.71 + $0.00 + $1.66 = $3.37 ```
## Snapshots A volume's first snapshot is a **complete** snapshot of it, with _all the volume's blocks_ being copied over.
All successive snapshots of the same volume are **incremental**, with _only the changes_ being copied over.
Incremental snapshots are stored in EBS' standard tier. Snapshots can be unbearably slow depending on the amount of data needing to be copied.
For comparison, the first snapshot of a standard 200 GiB `gp3` volume took about 2h to complete. Snapshots can be [archived][archive amazon ebs snapshots] to save money should they **not** need frequent nor fast retrieval.
When archived, incremental snapshots are converted to **full snapshots** and moved to EBS' archive tier. > The **minimum** archival period is **90 days**.
> Archived snapshots deleted or permanently restored before the end of the minimum archival period are billed for the > whole period. When access to archived snapshots is needed, they need to be restored to the standard tier before use. Restoring can take **up to 72h**. Lifecycle policies' `targetTags` attribute targets resources of the specified type in an **OR** fashion, not **AND**, meaning they will target all resources with **at least one** of the defined target tags. ## Encryption Refer [How Amazon EBS encryption works]. One can encrypt both boot and data volumes. At the time of writing, only **symmetric** keys are supported. Volumes attached to supported instance types encrypt the following types of data: - Data **at rest** inside the volume. - Data moving between the volume and the attached instance. - Snapshots created from the volume. - Volumes created from said snapshots. Volumes are encrypted with a AES-256 data key.
The key is: 1. Generated by KMS. 1. Encrypted by KMS with another KMS-managed key. 1. Stored with the volume's information. EBS automatically creates a unique AWS-managed key in **each** Region where one creates EBS resources, using the `aws/ebs` alias. EBS then uses this KMS key for encryption by default.
Alternatively, one can use a **symmetric** customer managed encryption key of one's own creation. EC2 integrates with KMS to encrypt and decrypt EBS volumes in ways that differ depending on whether the original snapshot for encrypted volumes is itself encrypted or unencrypted.
The original snapshot is encrypted 1. EC2 sends a `GenerateDataKeyWithoutPlaintext` request to KMS specifying the KMS key for volume encryption. 1. If the volume is encrypted using the same key as the snapshot, KMS encrypts that key using that same data key as the snapshot.
If the volume is encrypted using a different KMS key, KMS generates a new data key and encrypts it using the specified key. The encrypted data key is then sent to EBS to be stored with the volume metadata. 1. When attaching the encrypted volume to an instance, EC2 sends a `CreateGrant` request to KMS to be allowed to decrypt the data key. 1. KMS decrypts the encrypted data key and sends the decrypted data key to EC2. 1. EC2 uses the plaintext data key in the Nitro hardware to encrypt disk I/O to the volume.
The plaintext data key persists in memory as long as the volume is attached to the instance.
The original snapshot is not encrypted 1. EC2 sends a `CreateGrant` request to KMS to be allowed to encrypt the volume that is being created from the snapshot. 1. EC2 sends a `GenerateDataKeyWithoutPlaintext` request to KMS specifying the key chosen for volume encryption. 1. KMS generates a new data key, encrypts it using the specified key, and sends the encrypted data key to EBS to be stored with the volume metadata. 1. EC2 sends a `Decrypt` request to KMS to decrypt the encrypted data key, which it then uses to encrypt the volume's data. 1. When attaching the encrypted volume to an instance, EC2 sends: 1. A `CreateGrant` request to KMS to be allowed to decrypt the data key. 1. A `Decrypt` request to KMS specifying the encrypted data key. 1. KMS decrypts the encrypted data key and sends the decrypted data key back to EC2. 1. EC2 uses the plaintext data key in the Nitro hardware to encrypt disk I/O to the volume.
The plaintext data key persists in memory as long as the volume is attached to the instance.
When KMS keys become unusable, the effect is **almost immediately** subject to **eventual** consistency.
The key state of the impacted KMS keys change to reflect their new condition, and all requests to use those keys in cryptographic operations fail. EC2 encrypts all I/O to and from attached volumes using the **data** key, not the KMS key itself.
There is **no** immediate effect on the EC2 instance or its attached EBS volumes when performing actions that make KMS keys unusable. EBS removes data keys from the hardware when encrypted EBS volumes are detached from instances.
Attaching EBS volumes which data keys are encrypted with unusable KMS keys to EC2 instances will fail, because EBS will not be able to use the KMS keys to decrypt the data key used for the volume.
Make the KMS key usable again to be able to attach such EBS volumes. ## Operations ### Increase disks' size Refer [Modify an Amazon EBS volume using Elastic Volumes operations] and [How do I increase or decrease the size of my EBS volume?]. 1. Increase the volume's size: ```sh aws ec2 modify-volume --volume-type 'gp3' --volume-id 'vol-0123456789abcdef0' --size '750' aws ec2 describe-volumes-modifications --volume-ids 'vol-0123456789abcdef0' --output 'VolumesModifications[]' ``` 1. Extend the volume's partitions from inside the instance using it: ```sh lsblk sudo growpart '/dev/nvme0n1' '1' # nitro sudo growpart '/dev/xvda' '1' # xen ``` 1. Extend the volume's file system from inside the instance using it: ```sh sudo xfs_growfs -d '/' # xfs sudo resize2fs '/dev/nvme0n1p1' # ext4 on nitro sudo resize2fs '/dev/xvda1' # ext4 on xen ``` ### Migrate `gp2` volumes to `gp3` See also [Hands-on Guide: How to migrate from gp2 to gp3 volumes and lower AWS cost]. It is **strongly advised** to take a snapshot of volumes before changing their type. ```sh aws ec2 describe-volumes --filters "Name=volume-type,Values=gp2" --query 'Volumes[].VolumeId' --output 'text' \ | xargs -pn '1' aws ec2 modify-volume --volume-type 'gp3' --volume-id ``` ## Further readings - [Amazon Web Services] - [What is block storage?] - AWS' [CLI] - [Archive Amazon EBS snapshots] - [Automate snapshot lifecycles] - [Choose the best Amazon EBS volume type for your self-managed database deployment] - [Extend the file system after resizing an EBS volume] - [Pricing][amazon ebs pricing] - [Hands-on Guide: How to migrate from gp2 to gp3 volumes and lower AWS cost] - [Amazon EBS-optimized instance types] - [Instances built on the AWS Nitro System] ### Sources - [Documentation] - [Delete Unused AWS EBS Volumes] - [`describe-volumes`][describe-volumes] - [`delete-volume`][delete-volume] - [Modify an Amazon EBS volume using Elastic Volumes operations] - [How do I increase or decrease the size of my EBS volume?] - [How Amazon EBS encryption works] - [Improving application performance and reducing costs with Amazon EBS-Optimized Instance burst capability] [amazon web services]: README.md [cli]: cli.md [ec2]: ec2.md [amazon ebs pricing]: https://aws.amazon.com/ebs/pricing/ [amazon ebs volume types]: https://docs.aws.amazon.com/ebs/latest/userguide/ebs-volume-types.html [amazon ebs-optimized instance types]: https://docs.aws.amazon.com/AWSEC2/latest/UserGuide/ebs-optimized.html [archive amazon ebs snapshots]: https://docs.aws.amazon.com/ebs/latest/userguide/snapshot-archive.html [automate snapshot lifecycles]: https://docs.aws.amazon.com/ebs/latest/userguide/snapshot-ami-policy.html [choose the best amazon ebs volume type for your self-managed database deployment]: https://aws.amazon.com/blogs/storage/how-to-choose-the-best-amazon-ebs-volume-type-for-your-self-managed-database-deployment/ [delete-volume]: https://docs.aws.amazon.com/cli/latest/reference/ec2/delete-volume.html [describe-volumes]: https://docs.aws.amazon.com/cli/latest/reference/ec2/describe-volumes.html [documentation]: https://docs.aws.amazon.com/ebs/ [extend the file system after resizing an ebs volume]: https://docs.aws.amazon.com/ebs/latest/userguide/recognize-expanded-volume-linux.html [how amazon ebs encryption works]: https://docs.aws.amazon.com/ebs/latest/userguide/how-ebs-encryption-works.html [how do i increase or decrease the size of my ebs volume?]: https://repost.aws/knowledge-center/ebs-increase-decrease-volume-size [improving application performance and reducing costs with amazon ebs-optimized instance burst capability]: https://aws.amazon.com/blogs/compute/improving-application-performance-and-reducing-costs-with-amazon-ebs-optimized-instance-burst-capability/ [instances built on the aws nitro system]: https://docs.aws.amazon.com/ec2/latest/instancetypes/ec2-nitro-instances.html [modify an amazon ebs volume using elastic volumes operations]: https://docs.aws.amazon.com/ebs/latest/userguide/ebs-modify-volume.html [what is block storage?]: https://aws.amazon.com/what-is/block-storage/ [delete unused aws ebs volumes]: https://www.nops.io/unused-aws-ebs-volumes/ [hands-on guide: how to migrate from gp2 to gp3 volumes and lower aws cost]: https://www.stream.security/post/hands-on-guide-how-to-migrate-from-gp2-to-gp3-volumes