# Ansible 1. [TL;DR](#tldr) 1. [Configuration](#configuration) 1. [Performance tuning](#performance-tuning) 1. [Inventories](#inventories) 1. [AWS](#aws) 1. [Patterns](#patterns) 1. [Templating](#templating) 1. [Tests](#tests) 1. [Loops](#loops) 1. [Validation](#validation) 1. [Assertions](#assertions) 1. [Asynchronous actions](#asynchronous-actions) 1. [Run tasks in parallel](#run-tasks-in-parallel) 1. [Error handling](#error-handling) 1. [Using blocks](#using-blocks) 1. [Output formatting](#output-formatting) 1. [Handlers](#handlers) 1. [Roles](#roles) 1. [Get roles](#get-roles) 1. [Assign roles](#assign-roles) 1. [Role dependencies](#role-dependencies) 1. [Create custom filter plugins](#create-custom-filter-plugins) 1. [Execution environments](#execution-environments) 1. [Build execution environments](#build-execution-environments) 1. [Secrets management](#secrets-management) 1. [Ansible Vault](#ansible-vault) 1. [Best practices](#best-practices) 1. [Troubleshooting](#troubleshooting) 1. [Print all known variables](#print-all-known-variables) 1. [Force notified handlers to run at a specific point](#force-notified-handlers-to-run-at-a-specific-point) 1. [Time tasks execution](#time-tasks-execution) 1. [Run specific tasks even in check mode](#run-specific-tasks-even-in-check-mode) 1. [Dry-run only specific tasks](#dry-run-only-specific-tasks) 1. [Set up recursive permissions on a directory so that directories are set to 755 and files to 644](#set-up-recursive-permissions-on-a-directory-so-that-directories-are-set-to-755-and-files-to-644) 1. [Only run a task when another has a specific result](#only-run-a-task-when-another-has-a-specific-result) 1. [Define when a task changed or failed](#define-when-a-task-changed-or-failed) 1. [Set environment variables for a play, role or task](#set-environment-variables-for-a-play-role-or-task) 1. [Set variables to the value of environment variables](#set-variables-to-the-value-of-environment-variables) 1. [Check if a list contains an item and fail otherwise](#check-if-a-list-contains-an-item-and-fail-otherwise) 1. [Define different values for `true`/`false`/`null`](#define-different-values-for-truefalsenull) 1. [Force a task or play to use a specific Python interpreter](#force-a-task-or-play-to-use-a-specific-python-interpreter) 1. [Provide a template file content inline](#provide-a-template-file-content-inline) 1. [Python breaks in OS X](#python-breaks-in-os-x) 1. [Load files' content into variables](#load-files-content-into-variables) 1. [Only run a task when explicitly requested](#only-run-a-task-when-explicitly-requested) 1. [Using AWS' SSM with Ansible fails with error _Failed to create temporary directory_](#using-aws-ssm-with-ansible-fails-with-error-failed-to-create-temporary-directory) 1. [Future feature annotations is not defined](#future-feature-annotations-is-not-defined) 1. [Further readings](#further-readings) 1. [Sources](#sources) ## TL;DR
Setup ```sh # Install. pip3 install --user 'ansible' brew install 'ansible' 'sshpass' # darwin sudo pamac install 'ansible' 'sshpass' # manjaro linux # Generate example configuration files with entries disabled. ansible-config init --disabled > 'ansible.cfg' ansible-config init --disabled -t 'all' > ~/'.ansible.cfg' # Show the current configuration. ansible-config dump ```
Usage ```sh # List hosts. ansible-inventory -i 'inventory' --list ansible-playbook -i 'inventory' 'playbook.yml' --list-hosts ansible -i 'inventory' all --list-hosts # Check the syntax of a playbook. # This will *not* execute the plays inside it. ansible-playbook 'path/to/playbook.yml' --syntax-check # Execute playbooks. ansible-playbook 'path/to/playbook.yml' -i 'hosts.list' ansible-playbook … -i 'host1,host2,hostN,' -l 'hosts,list' ansible-playbook … -i 'host1,host2,other,' -l 'hosts-pattern' --step # Show what changes (with details) a play would apply to the local machine. ansible-playbook 'path/to/playbook.yml' -i 'localhost,' -c 'local' -vvC # Only execute tasks with specific tags. ansible-playbook 'path/to/playbook.yml' --tags 'configuration,packages' ansible-playbook -i 'localhost,' -c 'local' -Dvvv 'playbook.yml' -t 'container_registry' --ask-vault-pass # Avoid executing tasks with specific tags. ansible-playbook 'path/to/playbook.yml' --skip-tags 'system,user' # Check what tasks will be executed. ansible-playbook 'path/to/playbook.yml' --list-tasks ansible-playbook … --list-tasks --tags 'configuration,packages' ansible-playbook … --list-tasks --skip-tags 'system,user' # Debug playbooks. ANSIBLE_ENABLE_TASK_DEBUGGER=True ansible-playbook … # Record how much time tasks take. ANSIBLE_CALLBACKS_ENABLED='profile_tasks' ansible-playbook … # Encrypt data using Vault. ansible-vault encrypt_string --name 'command_output' 'somethingNobodyShouldKnow' ansible-vault encrypt '.ssh/id_rsa' --vault-password-file 'password_file.txt' ANSIBLE_VAULT_PASSWORD_FILE='password_file.txt' ansible-vault encrypt --output 'ssh.key' '.ssh/id_rsa' # Print out decoded contents of files encrypted with Vault. ansible-vault view 'ssh.key.pub' ansible-vault view 'ssh.key.pub' --vault-password-file 'password_file.txt' # Edit decoded contents of files encrypted with Vault. ANSIBLE_VAULT_PASSWORD='abracadabra' ansible-vault edit 'ssh.key.pub' ansible-vault edit 'ssh.key.pub' --vault-password-file 'password_file.txt' # Decrypt files encrypted with Vault. ansible-vault decrypt 'ssh.key' ansible-vault decrypt --output '.ssh/id_rsa' --vault-password-file 'password_file.txt' 'ssh.key' # List roles installed from Galaxy. ansible-galaxy list # Install roles from Galaxy. ansible-galaxy install 'namespace.role' ansible-galaxy install --roles-path 'path/to/ansible/roles' 'namespace.role' ansible-galaxy install 'namespace.role,v1.0.0' ansible-galaxy install 'git+https://github.com/namespace/role.git,commit-hash' ansible-galaxy install -r 'requirements.yml' # Create new roles. ansible-galaxy init 'role_name' ansible-galaxy role init --type 'container' --init-path 'path/to/role' 'name' # Remove roles installed from Galaxy. ansible-galaxy remove 'namespace.role' ```
Real world use cases ```sh # Show hosts' ansible facts. ansible -i 'path/to/hosts/file' -m 'setup' all ansible -i 'host1,hostN,' -m 'setup' 'host1' -u 'remote-user' ansible -i 'localhost,' -c 'local' -km 'setup' 'localhost' # Execute locally using Ansible from the virtual environment in the current directory. ansible -i 'localhost ansible_python_interpreter=venv/bin/python3,' -c 'local' -m 'ansible.builtin.copy' -a 'src=/tmp/src' -a 'dest=/tmp/dest' 'localhost' # Check the Vault password file is correct. diff 'some_role/files/ssh.key.plain' <(ansible-vault view --vault-password-file 'password_file.txt' 'some_role/files/ssh.key.enc') # Use AWS SSM for connections. ansible-playbook 'playbook.yaml' -DCvvv \ -e 'ansible_aws_ssm_plugin=/usr/local/sessionmanagerplugin/bin/session-manager-plugin' \ -e 'ansible_connection=aws_ssm' -e 'ansible_aws_ssm_bucket_name=ssm-bucket' -e 'ansible_aws_ssm_region=eu-west-1' \ -e 'ansible_remote_tmp=/tmp/.ansible-\${USER}/tmp' \ -i 'i-0123456789abcdef0,' ```
Galaxy collections and roles worth a check: | ID | Type | Description | | ---------------------------------------------- | ---------- | --------------------- | | [sivel.toiletwater][galaxy sivel.toiletwater] | collection | Extra filters, mostly | UIs: | UI | Static inventories | Dynamic inventories | | ----------- | ------------------ | ------------------- | | [AWX] | ✓ | ✓ | | [Rundeck] | ✓ | ? | | [Semaphore] | ✓ | ✗ | | [Zuul] | ? | ? | ## Configuration Ansible can be configured using INI files named `ansible.cfg`, environment variables, command-line options, playbook keywords, and variables. The `ansible-config` utility allows to see all the configuration settings available, their defaults, how to set them and where their current value comes from. Ansible will process the following list and use the first file found; all the other files are ignored even if existing: 1. the `ANSIBLE_CONFIG` environment variable; 1. the `ansible.cfg` file in the current directory; 1. the `~/.ansible.cfg` file in the user's home directory; 1. the `/etc/ansible/ansible.cfg` file. Generate a fully commented-out example of the `ansible.cfg` file: ```sh ansible-config init --disabled > 'ansible.cfg' # Includes existing plugins. ansible-config init --disabled -t all > 'ansible.cfg' ``` ### Performance tuning Refer the following: - [8 ways to speed up your Ansible playbooks] - [6 ways to speed up Ansible playbook execution] - [How to speed up Ansible playbooks drastically?] - [Easy things you can do to speed up ansible] Suggestions: - Optimize fact gathering: - Disable fact gathering when not used. - Consider using smart fact gathering: ```ini [defaults] gathering = smart fact_caching = jsonfile fact_caching_connection = /tmp/ansible/facts.json ; /tmp/ansible to use the directory and have a file per host fact_caching_timeout = 86400 ``` - Only gather subsets of facts: ```yaml - name: Play with selected facts gather_facts: true gather_subset: - '!all' - '!min' - system ``` Refer the [setup module] for more information, and the [setup module source code] for available keys. - Consider increasing the number of forks when dealing with lots of managed hosts: ```ini [defaults] forks = 25 ``` - Set **independent** tasks as async. - Optimize SSH connections: - Prefer key-based authentication if used: ```ini [ssh_connection] ssh_args = -o PreferredAuthentications=publickey ``` - Use pipelining: ```ini [ssh_connection] pipelining = True ``` - Consider using multiplexing: ```ini [ssh_connection] ssh_args = -o ControlMaster=auto -o ControlPersist=3600s ``` - Consider installing and using the [Mitogen plugin][mitogen for ansible] on the controller: ```sh curl -fsLO 'https://github.com/mitogen-hq/mitogen/releases/download/v0.3.7/mitogen-0.3.7.tar.gz' tar -xaf 'mitogen-0.3.7.tar.gz' ``` ```ini [defaults] strategy_plugins = mitogen-0.3.7/ansible_mitogen/plugins/strategy strategy = mitogen_linear ``` > Be advised that mitogen is not really supported by Ansible and has some issues with privilege escalation > ([1](https://github.com/mitogen-hq/mitogen/issues/466)). - Improve the code: - Bundle up package installations together. - Beware of _expensive_ calls. ## Inventories ```ini saturn ansible_python_interpreter=/usr/bin/python3.12 ansible_connection=local jupiter.lan ansible_python_interpreter=/usr/bin/python3 ansible_port=4444 [accessed_remotely] saturn jupiter.lan uranus.example.com ansible_port=5987 [swap_resistent] jupiter.lan saturn [workstations] saturn ; mars.lan ansible_port=4444 ``` ### AWS Refer [Integrate with AWS SSM]. ### Patterns Refer [Patterns: targeting hosts and groups]. They allow to specify hosts and/or groups from the inventory. Ansible will execute on all hosts included in the pattern. They can refer to a single host, an IP address, an inventory group, a set of groups, or all hosts.
One can exclude or require subsets of hosts, use wildcards or regular expressions, and more. Use either a `,` or a `:` to separate lists of hosts.
The `,` is preferred when dealing with ranges and IPv6 addresses. | What | Patterns | Targets | | ---------------------- | -------------------------------------- | ------------------------------------------------------------------------------- | | Everything | `all`, `*` | All hosts | | Single host | `fqdn`, `192.168.1.1`, `localhost` | The single host directly identified by the pattern | | Multiple hosts | `host1:host2`, `host1,host2` | All hosts directly identified by the pattern | | Single group | `webservers`, `tag_Application_Gitlab` | All hosts in the group identified by the pattern | | Multiple groups | `webservers:dbservers` | All hosts in all groups identified by the pattern | | Exclude groups | `webservers:!atlanta` | All hosts in the specified groups **not** identified by the **negated** pattern | | Intersection of groups | `webservers:&staging` | All hosts present in **all** the groups identified by the pattern | One can use **wildcard** patterns with FQDNs or IP addresses, as long as the hosts are named in your inventory by FQDN or IP address. ## Templating Ansible leverages [Jinja2 templating], which can be used directly in tasks or through the `template` module. All Jinja2's standard filters and tests can be used, with the addition of: - specialized filters for selecting and transforming data - tests for evaluating template expressions - lookup plugins for retrieving data from external sources for use in templating All templating happens **on the Ansible controller**, **before** the task is sent and executed on the target machine. Updated [examples][examples templating] are available. ```yaml # Remove empty or false values from a list piping it to 'select()'. # Returns ["string"]. - vars: list: ["", "string", 0, false] ansible.builtin.debug: var: list | select # Remove only empty strings from a list 'reject()'ing them. # Returns ["string", 0, false]. - vars: list: ["", "string", 0, false] ansible.builtin.debug: var: list | reject('match', '^$') # Merge two lists. # Returns ["a", "b", "c", "d"]. - vars: list1: ["a", "b"] list2: ["c", "d"] ansible.builtin.debug: var: list1 + list2 # Dedupe elements in a list. # Returns ["a", "b"]. - vars: list: ["a", "b", "b", "a"] ansible.builtin.debug: var: list | unique # Sort a list by version number (not lexicographically). # Returns ['2.7.0', '2.8.0', '2.9.0', '2.10.0' '2.11.0']. - vars: list: ['2.8.0', '2.11.0', '2.7.0', '2.10.0', '2.9.0'] ansible.builtin.debug: var: list | community.general.version_sort # Generate a random password. # Returns a random string following the specifications. - vars: password: "{{ lookup('password', '/dev/null length=32 chars=ascii_letters,digits,punctuation') }}" ansible.builtin.debug: var: password # Hash a password. # Returns a hash of the requested type. - vars: password: abcd salt: "{{ lookup('community.general.random_string', special=false) }}" ansible.builtin.debug: var: password | password_hash('sha512', salt) # Get a variable's type. - ansible.builtin.debug: var: "'string' | type_debug" ``` ### Tests Return a boolean result. ```yaml # Compare semver version numbers. - ansible.builtin.debug: var: "'2.0.0-rc.1+build.123' is version('2.1.0-rc.2+build.423', 'ge', version_type='semver')" # Find specific values in JSON objects. - ansible.builtin.command: ssm-cli get-diagnostics --output 'json' become: true register: diagnostics failed_when: diagnostics.stdout | to_json | community.general.json_query('DiagnosticsOutput[*].Status=="Failed"') ``` ### Loops ```yaml # Get the values of some special variables. # See the 'Further readings' section for the full list. - ansible.builtin.debug: var: "{{ item }}" with_items: ["ansible_local", "playbook_dir", "role_path"] # Fail when any of the given variables is an empty string. # Returns the ones which are empty. - when: lookup('vars', item) == '' ansible.builtin.fail: msg: "The {{ item }} variable is an empty string" loop: - variable1 - variableN # Iterate through nested loops. - vars: middles: - 'middle1' - 'middle2' ansible.builtin.debug: msg: "{{ item[0] }}, {{ item[1] }}, {{ item[2] }}" with_nested: - ['outer1', 'outer2'] - "{{ middles }}" - ['inner1', 'inner2'] ``` ## Validation ### Assertions ```yaml - ansible.builtin.assert: that: - install_method in supported_install_methods - external_url is ansible.builtin.url fail_msg: What to say if any of the above conditions fail success_msg: What to say if all of the above conditions succeed ``` ## Asynchronous actions Refer [Asynchronous actions and polling]. Used to avoid connection timeouts and to run tasks concurrently. Executing tasks in the background will return a Job ID that can be polled for information about that task.
Polling keeps the connection to the remote node open between polls. Use the `async` keyword in playbook tasks.
Leaving it off makes tasks run synchronously, which is Ansible's default. > As of Ansible 2.3, `async` does **not** support check mode and tasks using it **will fail** when run in check mode. Asynchronous tasks will create temporary async job cache file (in `~/.ansible_async/` by default).
When asynchronous tasks complete **with** polling enabled, the related temporary async job cache file is automatically removed. This does **not** happen for tasks that do **not** use polling. ```sh # Execute long running operations asynchronously in the background. ansible 'all' -B '3600' -P '0' -a '/usr/bin/long_running_operation --do-stuff' # no polling ansible 'all' -B '1800' -P '60' -a '/usr/bin/long_running_operation --do-stuff' # with polling # Check on background jobs' status. ansible 'web1.example.com' -m 'async_status' -a 'jid=488359678239.2844' ``` ```yaml --- - … tasks: - name: Simulate long running operation (15 sec), wait for up to 45 sec, poll every 5 sec ansible.builtin.command: /bin/sleep 15 async: 45 poll: 5 ``` The default poll value is set by the `DEFAULT_POLL_INTERVAL` setting.
There is **no** default for `async`'s time limit. Asynchronous playbook tasks **always** return changed. ### Run tasks in parallel Use `async` with `poll` set to _0_.
When `poll` is _0_, Ansible starts the task and immediately moves on to the next one with**out** waiting for a result from the first.
Each asynchronous task runs until it either completes, fails or times out (running longer than the value set for its `async`). Playbook runs end with**out** checking back on asynchronous tasks. ```yaml --- - tasks: - name: Simulate long running op (15 sec), allow to run for 45 sec, fire and forget ansible.builtin.command: /bin/sleep 15 async: 45 poll: 0 ``` Operations requiring exclusive locks, such as YUM transactions, will make successive operations that require those files wait or fail. Synchronize asynchronous tasks by registering them to obtain their job ID and using it with the `async_status` module in later tasks: ```yaml - tasks: - name: Run an async task ansible.builtin.yum: name: docker-io state: present async: 1000 poll: 0 register: yum_sleeper - name: Check on an async task async_status: jid: "{{ yum_sleeper.ansible_job_id }}" register: job_result until: job_result.finished retries: 100 delay: 10 ``` ## Error handling ### Using blocks Refer [Blocks]. ```yaml - name: Error handling in blocks block: - name: This executes normally ansible.builtin.debug: msg: I execute normally - name: This errors out ansible.builtin.command: "/bin/false" - name: This never executes ansible.builtin.debug: msg: I never execute due to the above task failing rescue: - name: This executes if any errors arose in the block ansible.builtin.debug: msg: I caught an error and can do stuff here to fix it always: - name: This always executes ansible.builtin.debug: msg: I always execute ``` ## Output formatting > Introduced in Ansible 2.5 Change Ansible's output setting the stdout callback to `json` or `yaml`: ```sh ANSIBLE_STDOUT_CALLBACK='yaml' ``` ```ini # ansible.cfg [defaults] stdout_callback = json ``` `yaml` will set tasks output only to be in the defined format: ```sh $ ANSIBLE_STDOUT_CALLBACK='yaml' ansible-playbook --inventory='localhost,' 'localhost.configure.yml' -vv --check PLAY [Configure localhost] ******************************************************************* TASK [Upgrade system packages] *************************************************************** task path: /home/user/localhost.configure.yml:7 ok: [localhost] => changed=false cmd: - /usr/bin/zypper - --quiet - --non-interactive … update_cache: false ``` The `json` output format will be a single, long JSON file: ```sh $ ANSIBLE_STDOUT_CALLBACK='json' ansible-playbook --inventory='localhost,' 'localhost.configure.yml' -vv --check { "custom_stats": {}, "global_custom_stats": {}, "plays": [ { "play": { … "name": "Configure localhost" }, "tasks": [ { "hosts": { "localhost": { "action": "community.general.zypper", "changed": false, … "update_cache": false } } } ] } ] } ``` ## Handlers Blocks and `import_tasks` tend to make the handlers unreachable. Instead of using blocks, give the same listen string to all involved handlers: ```diff - - name: Block name - block: - - name: First task - … - - name: N-th task - … + - name: First task + listen: Block name + … + - name: N-th task + listen: Block name + … ``` Instead of using `ìmport_tasks`, use `include_tasks`: ```diff - name: First task - import_tasks: tasks.yml + include_tasks: tasks.yml ``` Handlers **can** notify other handlers: ```yaml - name: Configure Nginx ansible.builtin.copy: … notify: Restart Nginx - name: Restart Nginx ansible.builtin.copy: … ``` ## Roles ### Get roles Roles can be either **created**: ```sh ansible-galaxy init 'role-name' ``` or **installed** from [Galaxy]: ```yaml --- # requirements.yml collections: - community.docker ``` ```sh ansible-galaxy install 'mcereda.boinc_client' ansible-galaxy install --roles-path 'path/to/roles' 'namespace.role' ansible-galaxy install 'namespace.role,v1.0.0' ansible-galaxy install 'git+https://github.com/namespace/role.git,commit-hash' ansible-galaxy install -r 'requirements.yml' ``` ### Assign roles In playbooks: ```yaml --- - hosts: all roles: - web_server - geerlingguy.postgresql - role: /custom/path/to/role vars: var1: value1 tags: example message: some message ``` Role assignments can**not** be parallelized at the time of writing. ### Role dependencies Set them up in `role/meta/main.yml`: ```yaml --- dependencies: - role: common vars: some_parameter: 3 - role: postgres vars: dbname: blarg other_parameter: 12 ``` and/or in `role/meta/requirements.yml`: ```yaml --- collections: - community.dns ``` ## Create custom filter plugins See [Creating your own Ansible filter plugins]. ## Execution environments Container images that can be used as Ansible control nodes. Prefer using `ansible-navigator` to `ansible-runner` for local runs as the latter is a pain in the ass to use directly.
Commands example ```sh pip install 'ansible-builder' 'ansible-runner' 'ansible-navigator' ansible-builder build --container-runtime 'docker' -t 'example-ee:latest' -f 'definition.yml' ansible-runner -p 'test_play.yml' --process-isolation --container-image 'example-ee:latest' ansible-navigator run 'test_play.yml' -i 'localhost,' --execution-environment-image 'example-ee:latest' \ --mode 'stdout' --pull-policy 'missing' --container-options='--user=0' ```
### Build execution environments Ansible Builder aids in the creation of Ansible Execution Environments.
Refer [Introduction to Ansible Builder] for how to build one. Builders' `build` command defaults to using: - `execution-environment.yml` or `execution-environment.yaml` as the definition file. - `$PWD/context` as the directory to use for the build context.
execution-environment.yml example Refer [Execution environment definition]. ```yaml --- version: 3 build_arg_defaults: ANSIBLE_GALAXY_CLI_COLLECTION_OPTS: '--pre' dependencies: ansible_core: # dedicated single-key dictionary package_pip: ansible-core==2.14.4 ansible_runner: # dedicated single-key dictionary package_pip: ansible-runner galaxy: requirements.yml python: # pip packages - six - psutil system: bindep.txt exclude: python: - docker system: - python3-Cython images: base_image: name: docker.io/redhat/ubi9:latest # Other available base images: # - quay.io/rockylinux/rockylinux:9 # - quay.io/centos/centos:stream9 # - registry.fedoraproject.org/fedora:38 # - registry.redhat.io/ansible-automation-platform-23/ee-minimal-rhel8:latest # (needs an account) # Custom package manager path for the RHEL based images # options: # package_manager_path: /usr/bin/microdnf additional_build_files: - src: files/ansible.cfg dest: configs additional_build_steps: prepend_base: - RUN echo This is a prepend base command! # Enable Non-default stream before packages provided by it can be installed. (optional) # - RUN $PKGMGR module enable postgresql:15 -y # - RUN $PKGMGR install -y postgresql prepend_galaxy: - COPY _build/configs/ansible.cfg /etc/ansible/ansible.cfg prepend_final: | RUN whoami RUN cat /etc/os-release append_final: - RUN echo This is a post-install command! - RUN ls -la /etc ```
requirements.yml example ```yaml --- collections: - redhat.openshift ```
## Secrets management Refer [handling secrets in your Ansible playbooks]. Use **interactive prompts** to ask for values at runtime. ```yaml --- - hosts: all gather_facts: false vars_prompt: - name: api_key prompt: Enter the API key tasks: - name: Ensure API key is present in config file ansible.builtin.lineinfile: path: /etc/app/configuration.ini line: "API_KEY={{ api_key }}" ``` Use [Ansible Vault] for automated execution when one does **not** require to use specific secrets or password managers. ### Ansible Vault Refer [Protecting sensitive data with Ansible Vault], [Ansible Vault tutorial] and [Ansible Vault with AWX]. Vault encrypts variables and files **at rest** and allows for their use in playbooks and roles.
It does **not** prevent tasks to print out data **in use**. See the [`no_log`](https://docs.ansible.com/ansible/latest/reference_appendices/faq.html#keep-secret-data) attribute for hiding sensible values. Protected data **will** require one or more passwords to encrypt and decrypt.
If storing vault passwords in third-party tools, one will need them need to allow for non-interactive access. Create and view protected data by using the `ansible-vault` command. Provide the Vault's password: - By using command line options.
Make ansible ask for it using `‑‑ask‑vault‑pass`, or provide a file containing it with `--vault-password-file`: ```sh ansible … --ask-vault-pass ansible-playbook … --vault-password-file 'password_file.txt' ``` - By exporting the `ANSIBLE_VAULT_PASSWORD` or `ANSIBLE_VAULT_PASSWORD_FILE` environment variables to specify the password itself or the location of the password file, respectively: ```sh ANSIBLE_VAULT_PASSWORD_FILE='password_file.txt' ansible … export ANSIBLE_VAULT_PASSWORD='abracadabra' ; ansible-playbook … ``` - By using the `ansible.cfg` config file to either always prompt for the password, or to specify the default location of the password file: ```ini [defaults] vault_password_file = password_file.txt ; ask_vault_pass = True ``` Should the password file be executable, Ansible will execute it and use its output as the password for Vault.
This works well to integrate with CLI-capable password managers: ```sh # File 'password_file.sh' # Gopass gopass show -o 'ansible/vault' # Bitwarden CLI # bw login --check >/dev/null && bw get password 'ansible vault' ``` Vault passwords can be any string, and there is currently no special command to create one.
One must provide the/a Vault password **every time one encrypts and/or decrypts data** with Vault.
If using multiple Vault passwords, one can differentiate between them by means of vault IDs. > By default, Vault IDs only label protected content to remind one which password one used to encrypt it. Ansible will > **not** check that the vault ID in the header of any encrypted content matches the vault ID one provides when using > that content, and will try and decrypt the data with the password one provides.
> Force this check by setting the `DEFAULT_VAULT_ID_MATCH` config option. Vault can only encrypt variables and files.
Encrypted content is marked in playbook and roles with the `!vault` tag. This tells Ansible and YAML that the content needs to be decrypted. Content created with `--vault-id` also contains the vault ID's label in the mark. Encrypted **variables** allow for mixed plaintext and encrypted content, even inline, in plays or roles.
One **cannot** _rekey_ encrypted variables.
To encrypt tasks or other content, one must encrypt the entire file. Input files are encrypted in-place unless one specifies the output files in the command.
Encrypt and use variables 1. Encrypt the variable's value: ```sh $ ansible-vault encrypt_string --name 'command_output' 'somethingNobodyShouldKnow' New Vault password: Confirm New Vault password: Encryption successful command_output: !vault | $ANSIBLE_VAULT;1.1;AES256 34306534613939316131303430653733633961623931363032633933393039373764356464623461 3463353332623466623661363831303836396165323238660a353137363562393161396566386565 35616662336536613365386164353439616232643131306534353264346635373566313630613261 3531373034333830640a353138306463653533366432623438343266623930396238313763643836 66646237336338353866306361316233326535333236363136613263346631633836 $ ansible-vault encrypt_string --name 'command_output' 'somethingNobodyShouldKnow' \ --vault-password-file 'password_file.txt' Encryption successful command_output: !vault | $ANSIBLE_VAULT;1.1;AES256 31373465393164316666663963643163313032623233356634313038333662653061623936383838 6166636433313438613338373438343130633766656535390a353338373261393931316533303837 64363736383163643238336565363936303434393931386131383463336539306466636231633131 6432396337366333350a356338623630626161333666373831313966633038343133316532383562 61303538333031333861313733383363656531613333356364363432343361393636 ``` 1. Use the output as the value: ```yaml - name: Configure credential 'Gitlab container registry PAT' tags: - container_registry - gitlab awx.awx.credential: organization: Private name: Gitlab container registry PAT credential_type: Container Registry inputs: host: gitlab.example.org:5050 username: awx # or anything, really password: !vault | $ANSIBLE_VAULT;1.1;AES256 34306534613939316131303430653733633961623931363032633933393039373764356464623461 3463353332623466623661363831303836396165323238660a353137363562393161396566386565 35616662336536613365386164353439616232643131306534353264346635373566313630613261 3531373034333830640a353138306463653533366432623438343266623930396238313763643836 66646237336338353866306361316233326535333236363136613263346631633836 verify_ssl: false update_secrets: false ``` 1. Require the play execution to ask for the password used during encryption: ```sh ansible-playbook -i 'localhost,' -c 'local' -Dvvv 'playbook.yml' -t 'container_registry' --ask-vault-pass ansible-playbook … --vault-password-file 'password_file.txt' ```
Encrypt and use existing files 1. Encrypt the file: ```sh # Input files are encrypted in place unless output files are specified $ ansible-vault encrypt 'ssh.key' New Vault password: Confirm New Vault password: Encryption successful $ ansible-vault encrypt --output 'ssh_key.enc' '.ssh/id_rsa' --vault-password-file 'password_file.txt' Encryption successful ``` 1. Use the file normally: ```yaml - name: Test value is read correctly tags: debug ansible.builtin.debug: msg: "{{ lookup('file', 'ssh_key.enc') }}" ``` 1. Require the play execution to ask for the password used during encryption: ```sh ansible-playbook -i 'localhost,' -c 'local' -Dvvv 'playbook.yml' -t 'container_registry' --ask-vault-pass ansible-playbook … --vault-password-file 'password_file.txt' ```
Decrypt files with `ansible-vault decrypt 'path/to/file'`.
Input files are decrypted in place unless one specifies the output files in the command.
Decrypt files ```sh $ ansible-vault decrypt 'ssh.key' New Vault password: Confirm New Vault password: Decryption successful $ ansible-vault decrypt --output '.ssh/id_rsa' --vault-password-file 'password_file.txt' 'ssh.key' Decryption successful ```
One can quickly view the content of encrypted files with `ansible-vault view 'path/to/file'`:
View encrypted files' content ```sh $ cat 'ssh.key.pub' $ANSIBLE_VAULT;1.1;AES256 38623265623763366431646435646634363136373831323464356130383432356266616461323730 6436396161613934356339323731336130383064386464610a373664326235376336333736306563 62366635646565633833336638616434353935313632323733326634356366666439316336353030 6635353335653034340a613330323565366365346638343464623036396134626537643064653437 36653734373839306135306165326464633231383236663735646465643332383332626564643038 64363531383430393834373764633564383537326430303038383661656134383631306336633539 33343166386135663537656262343734383339383363343736633965393262666133623932653732 63613034393964333865626532636332393964396463613131356534623433353065313661383461 37646635336433376132393766333761306162366666346634323166353630633036 $ ansible-vault view 'ssh.key.pub' Vault password: ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFIw4vv6LYg3P7bfgrR5I4k/0123456789abcdefghIL me@example.org $ ansible-vault view 'ssh.key.pub' --vault-password-file 'password_file.txt' ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIFIw4vv6LYg3P7bfgrR5I4k/0123456789abcdefghIL me@example.org ```
Or even edit their content with `ansible-vault edit 'path/to/file'`. ## Best practices - Tag **all** tasks somehow. - Define tasks so that playbook runs will **not** fail just because one task depends on another. - Provide ways to **manually** feed values to dependent tasks so that runs can start from there or only use tagged tasks, e.g. by using variables that can be overridden in the command line. - Consider using `blocks` to group tasks logically. - Keep debugging messages but set them to run only at higher verbosity: ```yaml tasks: - debug: msg: "I always display!" - debug: msg: "I only display with ansible-playbook -vvv+" verbosity: 3 ``` - When **replacing** resources, if possible, make sure the replacement is set correctly **before** deleting the original. - If using other systems to maintain a canonical list of systems in one's infrastructure, consider using dynamic inventories. ## Troubleshooting ### Print all known variables Print the special variable `vars` as a task: ```yaml - name: Debug all variables ansible.builtin.debug: var=vars ``` ### Force notified handlers to run at a specific point Use the `meta` plugin with the `flush_handlers` option: ```yaml - name: Force all notified handlers to run at this point, not waiting for normal sync points ansible.builtin.meta: flush_handlers ``` ### Time tasks execution Add `profile_tasks` the list of enable callbacks. Choose one or more options: - Add it to `callbacks_enabled` in the `[defaults]` section of Ansible's configuration file: ```ini [defaults] callbacks_enabled = profile_tasks # or ansible.posix.profile_tasks ``` - Set the `ANSIBLE_CALLBACKS_ENABLED` environment variable: ```sh export ANSIBLE_CALLBACKS_ENABLED='profile_tasks' ``` ### Run specific tasks even in check mode Add the `check_mode: false` pair to the task: ```yaml - name: this task will make changes to the system even in check mode check_mode: false ansible.builtin.command: /something/to/run --even-in-check-mode ``` ### Dry-run only specific tasks Add the `check_mode: true` pair to the task: ```yaml - name: This task will always run under check mode and not change the system check_mode: true ansible.builtin.lineinfile: line: "important file" dest: /path/to/file.conf state: present ``` ### Set up recursive permissions on a directory so that directories are set to 755 and files to 644 Use the special `X` mode setting in the `file` plugin: ```yaml - name: Fix files and directories' permissions ansible.builtin.file: dest: /path/to/some/dir mode: u=rwX,g=rX,o=rX recurse: yes ``` ### Only run a task when another has a specific result When a task executes, it also stores the two special values `changed` and `failed` in its results.
One can use those as conditions to execute the next ones: ```yaml - name: Trigger task ansible.builtin.command: any register: trigger_task ignore_errors: true - name: Run only on change when: trigger_task.changed ansible.builtin.debug: msg="The trigger task changed" - name: Run only on failure when: trigger_task.failed ansible.builtin.debug: msg="The trigger task failed" ``` Alternatively, you can use special checks built for this: ```yaml - name: Run only on success when: trigger_task is succeeded ansible.builtin.debug: msg="The trigger task succeeded" - name: Run only on change when: trigger_task is changed ansible.builtin.debug: msg="The trigger task changed" - name: Run only on failure when: trigger_task is failed ansible.builtin.debug: msg="The trigger task failed" - name: Run only on skip when: trigger_task is skipped ansible.builtin.debug: msg="The trigger task skipped" ``` ### Define when a task changed or failed This lets you avoid using `ignore_errors`. Use the `changed_when` and `failed_when` attributes to define your own conditions: ```yaml - name: Task with custom results ansible.builtin.command: any register: result changed_when: - result.rc == 2 - result.stderr | regex_search('things changed') failed_when: - result.rc != 0 - not (result.stderr | regex_search('all good')) ``` ### Set environment variables for a play, role or task Environment variables can be set at a play, block, or task level using the `environment` keyword: ```yaml - name: Use environment variables for a task environment: HTTP_PROXY: http://example.proxy ansible.builtin.command: curl ifconfig.io ``` The `environment` keyword does **not** affect Ansible itself or its configuration settings, the environment for other users, or the execution of other plugins like lookups and filters.
Variables set with `environment` do **not** automatically become Ansible facts, even when set at the play level. ### Set variables to the value of environment variables Use the `lookup()` plugin with the `env` option: ```yaml - name: Use a local environment variable ansible.builtin.debug: msg="HOME={{ lookup('env', 'HOME') }}" ``` ### Check if a list contains an item and fail otherwise ```yaml - name: Check if a list contains an item and fail otherwise when: item not in list ansible.builtin.fail: msg="item not in list" ``` ### Define different values for `true`/`false`/`null` Create a test and define two values: the first will be returned when the test returns `true`, the second will be returned when the test returns `false` (Ansible 1.9+): ```yaml {{ (ansible_pkg_mgr == 'zypper') | ternary('gnu_parallel', 'parallel') }} ``` Since Ansible 2.8 you can define a third value to be returned when the test returns `null`: ```yaml {{ autoscaling_enabled | ternary(true, false, omit) }} ``` ### Force a task or play to use a specific Python interpreter Just set it in the Play's or Task's variables: ```yaml vars: ansible_python_interpreter: /usr/local/bin/python3.9 ``` ### Provide a template file content inline Use the `ansible.builtin.copy` instead of `ansible.builtin.template`: ```yaml - name: Configure knockd ansible.builtin.copy: dest: /etc/knockd.conf content: | [options] UseSyslog ``` ### Python breaks in OS X Root Cause: > Mac OS High Sierra and later versions have restricted multithreading for improved security.
> Apple has defined some rules on what is allowed and not is not after forking processes, and have also added > `async-signal-safety` to a limited number of APIs. Solution: Disable fork initialization safety features as shown in [Why Ansible and Python fork break on macOS High Sierra+ and how to solve]\: ```sh export OBJC_DISABLE_INITIALIZE_FORK_SAFETY=YES ``` ### Load files' content into variables For **local** files, use lookups: ```yaml user_data: "{{ lookup('file', 'path/to/file') }}" ``` For **remote** files, use the [`slurp` module][slurp]: ```yaml - ansible.builtin.slurp: src: "{{ user_data_file }}" register: slurped_user_data - ansible.builtin.set_fact: user_data: "{{ slurped_user_data.content | ansible.builtin.b64decode }}" ``` The contents are presented as base64 string. The decode is needed. ### Only run a task when explicitly requested Leverage the [`never` tag][special tags: always and never] to never execute the task unless requested by using the `--tags 'never'` option: ```yaml - tags: never ansible.builtin.debug: msg: … ``` Conversely, one can achieve the opposite by using the `always` tag and the `--skip 'always'` option: ```yaml - tags: always ansible.builtin.command: … ``` ### Using AWS' SSM with Ansible fails with error _Failed to create temporary directory_ Message example: > ```plaintext > fatal: [i-4ccab452bb7743336]: UNREACHABLE! => { > "changed": false, > "msg": "Failed to create temporary directory. In some cases, you may have been able to authenticate and did not have permissions on the target directory. Consider changing the remote tmp path in ansible.cfg to a path rooted in \"/tmp\", for more error information use -vvv. Failed command was: ( umask 77 && mkdir -p \"` echo \u001b]0;@ip-192-168-42-42:/usr/bin\u0007/home/centos/.ansible/tmp `\"&& mkdir \"` echo \u001b]0;@ip-192-168-42-42:/usr/bin\u0007/home/centos/.ansible/tmp/ansible-tmp-1708603630.2433128-49665-225488680421418 `\" && echo ansible-tmp-1708603630.2433128-49665-225488680421418=\"` echo \u001b]0;@ip-192-168-42-42:/usr/bin\u0007/home/centos/.ansible/tmp/ansible-tmp-1708603630.2433128-49665-225488680421418 `\" ), exited with result 1, stdout output: \u001b]0;@ip-192-168-42-42:/usr/bin\u0007bash: @ip-192-168-42-42:/usr/bin/home/centos/.ansible/tmp: No such file or directory\r\r\nmkdir: cannot create directory '0': Permission denied\r\r", > "unreachable": true > } > ``` Root cause: By default, SSM starts sessions in the `/usr/bin` directory. Solution: Explicitly set Ansible's temporary directory to a folder the remote user can write to.
See [Integrate with AWS SSM]. ### Future feature annotations is not defined Refer [Newer versions of Ansible don't work with RHEL 8]. Error message example: > ```plaintext > SyntaxError: future feature annotations is not defined > ``` Solution: use a version of `ansible-core` lower than 2.17. ## Further readings - [Configuration] - [Templating] - [Examples] - [Roles] - [Tests] - [Special variables] - [Collections index]
Each also shows the list of connection types, filters, modules, etc it adds. - [Automating Helm using Ansible] - [Edit .ini file in other servers using Ansible PlayBook] - [Yes and No, True and False] - [Galaxy] - [Ansible Galaxy user guide] - [Windows playbook example] - [Special tags: `always` and `never`][special tags: always and never] - [Integrate with AWS SSM] - [Mitogen for Ansible] - [Debugging tasks] - [AWX] - [Introduction to Ansible Builder] - [Ansible Navigator] - [Ansible Runner] ### Sources - [Removing empty values from a list and assigning it to a new list] - [Human-Readable Output Format] - [How to append to lists] - [Check if a list contains an item in ansible] - [Working with versions] - [How to install SSHpass on Mac] - [Include task only if file exists] - [Unique filter of list in jinja2] - [Only do something if another action changed] - [How to recursively set directory and file permissions] - [Is it possible to use inline templates?] - [How to set up and use Python virtual environments for Ansible] - [Merging two dictionaries by key in Ansible] - [Creating your own Ansible filter plugins] - [Why Ansible and Python fork break on macOS High Sierra+ and how to solve] - [Ansible: set variable to file content] - [How can I hide skipped tasks output in Ansible] - [Ansible roles: basics, creating & using] - [Developing and Testing Ansible Roles with Molecule and Podman - Part 1] - [How to get an arbitrary remote user's home directory in Ansible?] - [6 ways to speed up Ansible playbook execution] - [How to speed up Ansible playbooks drastically?] - [Easy things you can do to speed up ansible] - [What is the exact list of Ansible setup min?] - [Setup module source code] - [8 ways to speed up your Ansible playbooks] - [Blocks] - [How to work with lists and dictionaries in Ansible] - [Handling secrets in your Ansible playbooks] - [Ansible - how to remove an item from a list?] - [Looping over lists inside of a dict] - [Newer versions of Ansible don't work with RHEL 8] - [Running your Ansible playbooks in parallel and other strategies] - [Execution environment definition] - [Protecting sensitive data with Ansible vault] - [Ansible Vault tutorial] - [Ansible Vault with AWX] - [Asynchronous actions and polling] - [Patterns: targeting hosts and groups] - [How to use ansible with S3 - Ansible aws_s3 examples] [ansible vault]: #ansible-vault [awx]: awx.md [integrate with aws ssm]: cloud%20computing/aws/ssm.md#integrate-with-ansible [rundeck]: rundeck.md [examples]: ../examples/ansible/ [examples templating]: ../examples/ansible/templating.yml [8 ways to speed up your ansible playbooks]: https://www.redhat.com/sysadmin/faster-ansible-playbook-execution [ansible galaxy user guide]: https://docs.ansible.com/ansible/latest/galaxy/user_guide.html [ansible navigator]: https://ansible.readthedocs.io/projects/navigator/en/stable/ [ansible runner]: https://ansible.readthedocs.io/projects/runner/en/stable/ [asynchronous actions and polling]: https://docs.ansible.com/ansible/latest/playbook_guide/playbooks_async.html [automating helm using ansible]: https://www.ansible.com/blog/automating-helm-using-ansible [blocks]: https://docs.ansible.com/ansible/latest/playbook_guide/playbooks_blocks.html [collections index]: https://docs.ansible.com/ansible/latest/collections/index.html [configuration]: https://docs.ansible.com/ansible/latest/reference_appendices/config.html [debugging tasks]: https://docs.ansible.com/ansible/latest/playbook_guide/playbooks_debugger.html [developing and testing ansible roles with molecule and podman - part 1]: https://www.ansible.com/blog/developing-and-testing-ansible-roles-with-molecule-and-podman-part-1/ [execution environment definition]: https://ansible.readthedocs.io/projects/builder/en/stable/definition/ [galaxy sivel.toiletwater]: https://galaxy.ansible.com/ui/repo/published/sivel/toiletwater/ [galaxy]: https://galaxy.ansible.com/ [introduction to ansible builder]: https://www.ansible.com/blog/introduction-to-ansible-builder/ [patterns: targeting hosts and groups]: https://docs.ansible.com/ansible/latest/inventory_guide/intro_patterns.html [protecting sensitive data with ansible vault]: https://docs.ansible.com/ansible/latest/vault_guide/index.html [roles]: https://docs.ansible.com/ansible/latest/user_guide/playbooks_reuse_roles.html [setup module source code]: https://github.com/ansible/ansible/blob/devel/lib/ansible/modules/setup.py [setup module]: https://docs.ansible.com/ansible/latest/collections/ansible/builtin/setup_module.html [slurp]: https://docs.ansible.com/ansible/latest/collections/ansible/builtin/slurp_module.html [special tags: always and never]: https://docs.ansible.com/ansible/latest/playbook_guide/playbooks_tags.html#special-tags-always-and-never [special variables]: https://docs.ansible.com/ansible/latest/reference_appendices/special_variables.html [templating]: https://docs.ansible.com/ansible/latest/user_guide/playbooks_templating.html [tests]: https://docs.ansible.com/ansible/latest/user_guide/playbooks_tests.html [6 ways to speed up ansible playbook execution]: https://wearenotch.com/speed-up-ansible-playbook-execution/ [ansible - how to remove an item from a list?]: https://stackoverflow.com/questions/40927792/ansible-how-to-remove-an-item-from-a-list#40927834 [ansible roles: basics, creating & using]: https://spacelift.io/blog/ansible-roles [ansible vault tutorial]: https://piyops.com/ansible-vault-tutorial [ansible vault with awx]: https://medium.com/t%C3%BCrk-telekom-bulut-teknolojileri/ansible-vault-with-awx-80b603617798 [ansible: set variable to file content]: https://stackoverflow.com/questions/24003880/ansible-set-variable-to-file-content [check if a list contains an item in ansible]: https://stackoverflow.com/questions/28080145/check-if-a-list-contains-an-item-in-ansible/28084746 [creating your own ansible filter plugins]: https://www.dasblinkenlichten.com/creating-ansible-filter-plugins/ [easy things you can do to speed up ansible]: https://mayeu.me/post/easy-things-you-can-do-to-speed-up-ansible/ [edit .ini file in other servers using ansible playbook]: https://syslint.com/blog/tutorial/edit-ini-file-in-other-servers-using-ansible-playbook/ [handling secrets in your ansible playbooks]: https://www.redhat.com/sysadmin/ansible-playbooks-secrets [how can i hide skipped tasks output in ansible]: https://stackoverflow.com/questions/39189549/how-can-i-hide-skipped-tasks-output-in-ansible#76147924 [how to append to lists]: https://blog.crisp.se/2016/10/20/maxwenzin/how-to-append-to-lists-in-ansible [how to get an arbitrary remote user's home directory in ansible?]: https://stackoverflow.com/questions/33343215/how-to-get-an-arbitrary-remote-users-home-directory-in-ansible#45447488 [how to install sshpass on mac]: https://stackoverflow.com/questions/32255660/how-to-install-sshpass-on-mac/62623099#62623099 [how to recursively set directory and file permissions]: https://superuser.com/questions/1024677/ansible-how-to-recursively-set-directory-and-file-permissions#1317715 [how to set up and use python virtual environments for ansible]: https://www.redhat.com/sysadmin/python-venv-ansible [how to speed up ansible playbooks drastically?]: https://www.linkedin.com/pulse/how-speed-up-ansible-playbooks-drastically-lionel-gurret [how to use ansible with s3 - ansible aws_s3 examples]: https://www.middlewareinventory.com/blog/ansible-aws_s3-example/ [how to work with lists and dictionaries in ansible]: https://www.redhat.com/sysadmin/ansible-lists-dictionaries-yaml [human-readable output format]: https://www.shellhacks.com/ansible-human-readable-output-format/ [include task only if file exists]: https://stackoverflow.com/questions/28119521/ansible-include-task-only-if-file-exists#comment118578470_62289639 [is it possible to use inline templates?]: https://stackoverflow.com/questions/33768690/is-it-possible-to-use-inline-templates#33783423 [jinja2 templating]: https://jinja.palletsprojects.com/en/3.1.x/templates/ [looping over lists inside of a dict]: https://www.reddit.com/r/ansible/comments/1b28dtm/looping_over_lists_inside_of_a_dict/ [merging two dictionaries by key in ansible]: https://serverfault.com/questions/1084157/merging-two-dictionaries-by-key-in-ansible#1084164 [mitogen for ansible]: https://mitogen.networkgenomics.com/ansible_detailed.html [newer versions of ansible don't work with rhel 8]: https://www.jeffgeerling.com/blog/2024/newer-versions-ansible-dont-work-rhel-8 [only do something if another action changed]: https://raymii.org/s/tutorials/Ansible_-_Only-do-something-if-another-action-changed.html [removing empty values from a list and assigning it to a new list]: https://stackoverflow.com/questions/60525961/ansible-removing-empty-values-from-a-list-and-assigning-it-to-a-new-list#60526774 [running your ansible playbooks in parallel and other strategies]: https://toptechtips.github.io/2023-06-26-ansible-parallel/ [semaphore]: https://semaphoreui.com/ [unique filter of list in jinja2]: https://stackoverflow.com/questions/44329598/unique-filter-of-list-in-jinja2 [what is the exact list of ansible setup min?]: https://stackoverflow.com/questions/71060833/what-is-the-exact-list-of-ansible-setup-min#71061125 [why ansible and python fork break on macos high sierra+ and how to solve]: https://ansiblepilot.medium.com/why-ansible-and-python-fork-break-on-macos-high-sierra-and-how-to-solve-d11540cd2a1b [windows playbook example]: https://geekflare.com/ansible-playbook-windows-example/ [working with versions]: https://docs.ansible.com/ansible/latest/collections/community/general/docsite/filter_guide_working_with_versions.html [yes and no, true and false]: https://chronicler.tech/red-hat-ansible-yes-no-and/ [zuul]: https://zuul-ci.org/