# Helios4 ## Table of contents 1. [OS installation](#os-installation) 1. [First boot](#first-boot) 1. [Connect to the Helios4 using a serial console](#connect-to-the-helios4-using-a-serial-console) 1. [First login](#first-login) 1. [Configuration](#configuration) 1. [Further readings](#further-readings) ## OS installation See the official [installation guide] for details. Requirements: 1. MicroSD card, possibly UHS-I or greater with 8GB free.
Suggested models: - SanDisk Extreme microSDHC UHS-I (32GB) - SanDisk Extreme PRO microSDHC UHS-I (32GB) - Strontium Nitro MicroSD (16GB) - Samsung microSDHC UHS-I EVO Plus (32GB) Refer to the [SD Card page][tested microsd cards] for a compatibility list of SD Card models. 1. USB to microUSB cable. 1. Ethernet cable category 5 or higher. Procedure: 1. Download the ISO from the [download page]. 1. Copy the ISO to the SD card and make it bootable: - using [balenaetcher]; - using the CLI: ```sh zcat 'Armbian_20.05.2_Helios4_buster_current_5.4.43.img.gz' \ | pv \ | sudo dd of='/dev/mmcblk0' bs='1M' conv='fsync' ``` ## First boot Connect the device in order: 1. inserted the microSD card; 1. connect your computer to the serial port with the Micro-USB to USB cable; 1. connect the device to the network with the Ethernet cable; 1. properly plug in the DC power connector before plugging the AC adapter into the wall. Now, connect the power adapter. ## Connect to the Helios4 using a serial console ```sh brew install 'picocom' sudo apt install 'picocom' sudo yum install 'picocom' sudo picocom -b '115200' '/dev/ttyUSB0' # Alternatively. screen '/dev/tty.usbserial-XXXXXXXX' '115200' -L ``` ### First login Username: `root` Password: `1234` ## Configuration ```sh sudo armbian-config ``` ## Further readings - [Armbian] [download page]: https://wiki.kobol.io/download/#helios4 [installation guide]: https://wiki.kobol.io/helios4/install/ [tested microsd cards]: https://wiki.kobol.io/helios4/sdcard/#tested-microsd-card [armbian]: armbian.md [balenaetcher]: http://etcher.io/