refactor: moved dotfile examples to the correct folder, added new ones

examples/dotfiles/.Brewfile

@@ -0,0 +1 @@
+# See Brewfile.

examples/dotfiles/.azure/config

@@ -0,0 +1,15 @@
+################################################################################
+## ~/.azure/config
+##
+## Sources:
+## - https://learn.microsoft.com/en-us/cli/azure/azure-cli-configuration
+################################################################################
+
+[cloud]
+name = AzureCloud
+
+[core]
+collect_telemetry = false
+
+[defaults]
+location = eastus

examples/dotfiles/.bash_profile

@@ -0,0 +1,25 @@
+################################################################################
+## ~/.bash_profile
+##
+## There are 3 different types of shells in Bash:
+## - the login shell;
+## - the interactive non-login shell;
+## - the non-interactive non-login shell.
+## Login shells read /etc/profile, and only the first one found between
+## '~/.bash_profile', '~/.bash_login' and '~/.profile' in this order.
+## Interactive non-login shells read /etc/bashrc and ~/.bashrc.
+## Non-interactive non-login shell read the file which name is the value of the
+## '$BASH_ENV' variable.
+## In this setup, ~/.bash_profile sources ~/.bashrc, which means that all
+## changes made here will also take effect in a login shell.
+##
+## This file is sourced by all Bash *login* shells on startup.
+################################################################################
+
+# Load the user's interactive settings.
+# This lines are recommended by the Bash info pages.
+: "${BASHRC=$HOME/.bashrc}"
+if [[ -r "$BASHRC" ]]
+then
+        source "$BASHRC"
+fi

examples/dotfiles/.bashrc

@@ -0,0 +1,247 @@
+################################################################################
+## ~/.bashrc
+##
+## There are 3 different types of shells in Bash:
+## - the login shell;
+## - the interactive non-login shell;
+## - the non-interactive non-login shell.
+## Login shells read '/etc/profile', and only the first one found between
+## '~/.bash_profile', '~/.bash_login' and '~/.profile' in this order.
+## Interactive non-login shells read '/etc/bashrc' and '~/.bashrc'.
+## Non-interactive non-login shells read the file which name is the value of the
+## '$BASH_ENV' variable.
+## In this setup, '~/.bash_profile' sources '~/.bashrc', which means that all
+## changes made here will also take effect in a login shell.
+##
+## This file is sourced by all *interactive* Bash shells on startup, including
+## some apparently interactive shells such as `scp` and `rcp` which can't
+## tolerate any output.
+## Make sure this doesn't display anything or bad things will happen!
+##
+## It is recommended to put language settings in '~/.bash_profile',
+## '~/.bash_login' or '~/.profile' rather than here, as multilingual X sessions
+## would not work properly if '$LANG' is overridden in every subshell.
+##
+## References:
+## - https://www.gnu.org/software/bash/manual/html_node/The-Shopt-Builtin.html
+################################################################################
+
+# Automatically logout after 60 minutes of inactivity.
+export TMOUT="3600"
+
+########################################
+# Ensure primary XDG variables are set.
+########################################
+
+: "${XDG_CONFIG_HOME:=${HOME}/.config}"
+: "${XDG_CACHE_HOME:=${HOME}/.cache}"
+: "${XDG_DATA_HOME:=${HOME}/.local/share}"
+: "${XDG_STATE_HOME:=${HOME}/.local/state}"
+: "${XDG_DATA_DIRS:=/usr/local/share:/usr/share}"
+: "${XDG_CONFIG_DIRS:=/etc/xdg}"
+
+########################################
+# Ensure PATH contains common binary directories.
+# Prefer user's and local paths.
+########################################
+
+export PATH="/Users/user/.local/bin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:$PATH"
+
+########################################
+# Basic utility aliases and functions.
+#
+# Used to simplify checks later.
+# Needed in all shells.
+# Ordered alphabetically and by dependencies.
+########################################
+
+alias disable-xtrace='set +o xtrace'
+alias enable-xtrace='set -o xtrace'
+
+# Print the whole current environment.
+alias printallenv='set -o posix && set'
+
+is-symlink-broken () { [[ ! -e "$1" ]] ; }
+
+is-shell-interactive () {
+	# From Bash's manpage:
+	#   '$PS1' is set and '$-' includes 'i' if the shell is interactive.
+
+	[[ $- =~ i ]] || [[ -t 0 ]]
+}
+
+is-shell-login () {
+	# From Bash's manpage:
+	#   A login shell is one whose first character of argument zero is a '-', or
+	#   one started with the '--login' option.
+
+	[[ $0 =~ ^- ]] || [[ $(shopt login_shell | cut -f 2) == 'on' ]]
+}
+
+to-lower () {
+	# Bash3 has no built-in means to convert case of a string, fallback to `tr`.
+	echo "$(echo "$1" | tr '[:upper:]' '[:lower:]')"
+}
+
+to-upper () {
+	# Bash3 has no built-in means to convert case of a string, fallback to `tr`.
+	echo "$(echo "$1" | tr '[:lower:]' '[:upper:]')"
+}
+
+is-true () {
+	# Needs to return 0 or 1 and not `true` or `false`.
+	# Input's case is lowered to save on match options.
+
+	local LOWERED_INPUT="$(to-lower "$1")"
+	[[ "$LOWERED_INPUT" =~ ^1|on|true|yes$ ]]
+}
+
+# If this is a non-interactive shell, do nothing else.
+# There is no need to set anything past this point for scp and rcp, and it's
+# important to refrain from outputting anything in those cases.
+is-shell-interactive || return
+
+########################################
+# Shell configuration.
+########################################
+
+# Check the window size of the current terminal window after each command.
+# If necessary, update the values of the LINES and COLUMNS variables.
+shopt -s checkwinsize
+
+# If Readline is being used, do not attempt to search PATH for possible
+# completions when the line is empty and wait a long time for this.
+shopt -s no_empty_cmd_completion
+
+# Add "/" to links to directories in autocompletion.
+set mark-symlinked-directories on
+
+####################
+# History management.
+####################
+
+# Erase duplicates and ignore lines starting with spaces.
+HISTCONTROL="ignorespace:erasedups"
+
+# Number of lines or commands allowed in the history file.
+HISTFILESIZE=100000
+
+# Number of lines or commands stored in memory as the history of the current
+# session.
+HISTSIZE=50000
+
+# Format how the history's entries are stored.
+HISTTIMEFORMAT="%Y-%m-%d %T  "
+
+# Attempt to save all lines of a multi-line command in the same history entry.
+# This allows easy re-editing of such commands.
+shopt -s cmdhist
+
+# Append the history entries in memory to the HISTFILE when exiting the shell,
+# rather than just overwriting the file.
+shopt -s histappend
+
+# If readline is being used, load the results of history substitution into the
+# editing buffer, allowing further modification before execution.
+shopt -s histverify
+
+########################################
+# Utility aliases and functions.
+#
+# Ordered and grouped by dependencies.
+########################################
+
+alias decomment='grep -Ev "^#|^$"'
+alias redo='$(history -p !!)'
+
+alias please='sudo'
+alias sedo='sudo redo'
+
+ask-for-confirmation () {
+	is-true "$DEBUG" && enable-xtrace
+
+	read -p 'Continue? ' REPLY
+
+	if ! is-true "$REPLY"
+	then
+		echo "aborting"
+		return 1
+	fi
+
+	local RETURN_VALUE=$?
+	is-true "$DEBUG" && disable-xtrace
+	return $RETURN_VALUE
+}
+
+swap () {
+	is-true "$DEBUG" && enable-xtrace
+
+	if [[ ! $# -eq 2 ]]
+	then
+		echo "Usage: $0 file1 file2"
+		echo "Example: $0 /etc/resolv.conf resolv.new"
+		return 1
+	fi
+
+	local TMPFILE="tmp.$$"
+	mv "$1" "$TMPFILE"
+	mv "$2" "$1"
+	mv "$TMPFILE" "$2"
+
+	local RETURN_VALUE=$?
+	is-true "$DEBUG" && disable-xtrace
+	return $RETURN_VALUE
+}
+
+########################################
+# Applications settings and shortcuts.
+########################################
+
+# Set the default editor.
+export EDITOR="/usr/bin/vim"
+
+# Enable colors.
+alias grep='grep --color=always'
+alias ls='ls -G'
+
+####################
+# GnuPG.
+####################
+
+# Integrate with the SSH agent.
+export SSH_AUTH_SOCK="$(/opt/homebrew/bin/gpgconf --list-dirs 'agent-ssh-socket')"
+/opt/homebrew/bin/gpgconf --launch 'gpg-agent'
+
+# Integrate with Pinentry.
+export GPG_TTY="$(tty)"
+
+####################
+# SSH.
+####################
+
+alias ssh-load-keys='eval `ssh-agent` && ssh-add'
+
+####################
+# Kubernetes.
+####################
+
+alias kubectl-current-context='kubectl config current-context'
+
+kubectl-decode () { echo "$1" | base64 -d ; }
+kubectl-encode () { echo -n "$1" | base64 ; }
+
+kubectl-nodes-with-issues () {
+	kubectl get nodes -o jsonpath='{.items[]}' \
+	| jq '
+		{
+			"node": .metadata.name,
+			"issues": [
+				.status.conditions[] | select(
+					.status != "False" and
+					.type != "Ready"
+				)
+			]
+		} | select( .issues|length > 0 )
+	' -
+}
+alias kubectl-nodes-with-issues-in-yaml='kubectl-nodes-with-issues | yq -y "." -'

examples/dotfiles/.config/chezmoi/.chezmoi.yaml

@@ -0,0 +1,19 @@
+################################################################################
+## ~/.config/chezmoi/.chezmoi.yaml
+##
+## Chezmoi configuration file in one of the supported formats (JSON, JSONC,
+## TOML, and YAML).
+## If multiple configuration file formats are present, chezmoi will report an
+## error.
+##
+## Sources:
+## - https://www.chezmoi.io/reference/configuration-file/
+################################################################################
+
+data:
+    email: user.name@example.com
+    hashedHostname: "965415361"
+encryption: gpg
+git:
+    autoPush: true
+sourceDir: /home/user/.dotfiles

examples/dotfiles/.config/git/config

@@ -0,0 +1,126 @@
+################################################################################
+## ~/.config/git/config or ~/.gitconfig
+##
+## Global git configuration file. Settings in here override the system's ones,
+## and are in turn overridden by the repositories' local ones.
+## Check the resolved configuration in full and its origins with the following:
+## `git config --list --show-origin`.
+##
+## Sources:
+## - https://git-scm.com/docs/git-config
+## - https://git-scm.com/book/en/v2/Customizing-Git-Git-Configuration
+################################################################################
+
+[alias]
+	branch-get-default = "!f() { \
+		git remote show origin \
+		| awk '/HEAD branch/ {print $NF}' \
+	;} && f"
+	branch-get-gone = "!f() { \
+		git fetch -p && \
+		git branch -vv \
+		| awk '/origin/&&/gone/{print $1}' \
+	;} && f"
+	branch-prune-gone = "!f() { \
+		git branch-get-gone \
+		| xargs \
+			git branch -D \
+	;} && f"
+	checkout-default-branch = "!f() { \
+		git checkout $(git branch-get-default) \
+	;} && f"
+	config-show-final = "!f() { \
+		git config --list \
+		| awk -F '=' '{print $1}' \
+		| sort -u \
+		| xargs -I {} \
+			sh -c 'printf \"{}=\" && git config --get {}' \
+	;} && f"
+	pull-from-all-remotes = "!f() { \
+		git remote show \
+		| xargs -I{} \
+			git pull {} ${1-$(git branch --show-current)} \
+	;} && f"
+	pull-from-all-remotes-once = "!f() { \
+		git remote-show-unique \
+		| xargs -I{} \
+			git pull {} ${1-$(git branch --show-current)} \
+	;} && f"
+	pull-from-reachable-remotes = "!f() { \
+		git remote show \
+		| xargs -I{} \
+			sh -c \"timeout 1 git ls-remote -hq {} HEAD >/dev/null 2>&1 && echo {}\" \
+		| xargs -I{} \
+			git pull {} ${1-$(git branch --show-current)} \
+	;} && f"
+	pull-from-reachable-remotes-once = "!f() { \
+		git remote-show-unique \
+		| xargs -I{} \
+			sh -c \"timeout 1 git ls-remote -hq {} HEAD >/dev/null 2>&1 && echo {}\" \
+		| xargs -I{} \
+			git pull {} ${1-$(git branch --show-current)} \
+	;} && f"
+	push-to-all-remotes = "!f() { \
+		git remote show \
+		| xargs -I{} \
+			git push {} ${1-$(git branch --show-current)} \
+	;} && f"
+	push-to-all-remotes-once = "!f() { \
+		git remote-show-unique \
+		| xargs -I{} \
+			git push {} ${1-$(git branch --show-current)} \
+	;} && f"
+	push-to-reachable-remotes = "!f() { \
+		git remote show \
+		| xargs -I{} \
+			sh -c \"timeout 1 git ls-remote -hq {} HEAD >/dev/null 2>&1 && echo {}\" \
+		| xargs -I{} \
+			git push {} ${1-$(git branch --show-current)} \
+	;} && f"
+	push-to-reachable-remotes-once = "!f() { \
+		git remote-show-unique \
+		| xargs -I{} \
+			sh -c \"timeout 1 git ls-remote -hq {} HEAD >/dev/null 2>&1 && echo {}\" \
+		| xargs -I{} \
+			git push {} ${1-$(git branch --show-current)} \
+	;} && f"
+	remote-show-unique = "!f() { \
+		git remote -v \
+		| sort -k2 -u \
+		| awk '{print $1}' \
+		| sort -u \
+	;} && f"
+	statis = status
+	statsu = status
+	switch-default-branch = "!f() { \
+		git switch $(git branch-get-default) \
+	;} && f"
+	top-level = "rev-parse --show-toplevel"
+[core]
+	# 'input' on unix, 'true' on windows
+	# 'false' only if you know what you are doing
+	autocrlf = input
+[diff]
+	wsErrorHighlight = all
+[init]
+	defaultBranch = main
+[pull]
+	rebase = false
+[submodule]
+	recurse = true
+[user]
+	email = name.surname@company.com
+	name = Name Surname
+
+# Enable LFS.
+[filter "lfs"]
+	clean = git-lfs clean -- %f
+	smudge = git-lfs smudge -- %f
+	process = git-lfs filter-process
+	required = true
+
+# Always sign commits.
+[commit]
+	gpgSign = true
+[user]
+	signingKey = 89C324BA

examples/dotfiles/.config/pip/pip.conf

@@ -0,0 +1,15 @@
+################################################################################
+## ~/.config/pip/pip.conf
+##
+## Sources:
+## - https://pip.pypa.io/en/stable/topics/configuration/
+################################################################################
+
+[global]
+timeout = 60
+index-url = https://download.zope.org/ppix
+no-cache-dir = false
+
+[install]
+no-compile = no
+no-warn-script-location = false

examples/dotfiles/.gitconfig

@@ -0,0 +1 @@
+# See ~/.config/git/config.

examples/dotfiles/.gnupg/gpg-agent.conf

@@ -0,0 +1,7 @@
+################################################################################
+## ~/.gnupg/gpg-agent.conf
+################################################################################
+
+default-cache-ttl 600
+enable-ssh-support
+max-cache-ttl 7200

examples/dotfiles/.gnupg/gpg.conf

@@ -0,0 +1,3 @@
+auto-key-retrieve
+no-emit-version
+default-key 7425E3348BAB159F4DBD1B9C9C74759518CB109F

examples/dotfiles/.gnupg/sshcontrol

@@ -0,0 +1,18 @@
+################################################################################
+## ~/.gnupg/sshcontrol
+##
+## List of allowed ssh keys.
+## Only keys present in this file are used in the SSH protocol.
+## The ssh-add tool may add new entries to this file to enable them; you may
+## also add them manually.
+## Comment lines, like this one, as well as empty lines are ignored.  Lines do
+## have a certain length limit but this is not serious limitation as the format
+## of the entries is fixed and checked by gpg-agent. A non-comment line starts
+## with optional white spaces, followed by the key grip of the key given as 40
+## hex digits, optionally followed by a caching TTL in seconds, and another
+## optional field for arbitrary flags.
+## Prepend the key grip with an '!' mark to disable it.
+################################################################################
+
+0123456789ABCDEF0123456789ABCDEF01234567
+FEDCBA9876543210FEDCBA9876543210FEDCBA98 0

examples/dotfiles/.inputrc

@@ -0,0 +1,24 @@
+################################################################################
+## ~/.inputrc
+##
+## Control the behavior of the readline library, used e.g. by Bash in its
+## interactive mode for line editing.
+##
+## This file is NOT used by ZSH.
+################################################################################
+
+# The bell style used e.g. on error or tab completion, possible values
+# are `none', `visible', and `audible' the ringing the bell.
+# set bell-style none
+
+# If set to on, words which have more than one possible completion without
+# any possible partial completion cause the matches to be listed immediately
+# instead of ringing the bell.
+# set show-all-if-unmodified on
+
+# If set to on, words which have more than one possible completion cause the
+# matches to be listed immediately instead of ringing the bell.
+# set show-all-if-ambiguous on
+
+# If set to on, disable case sensitivity for completion purposes.
+set completion-ignore-case on

examples/dotfiles/.kube/config

@@ -0,0 +1,26 @@
+################################################################################
+## ~/.kube/config
+##
+## Sources:
+## - https://kubernetes.io/docs/concepts/configuration/organize-cluster-access-kubeconfig/
+################################################################################
+
+apiVersion: v1
+clusters:
+- cluster:
+    certificate-authority-data: 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
+    server: https://kubernetes.docker.internal:6443
+  name: docker-desktop
+contexts:
+- context:
+    cluster: docker-desktop
+    user: docker-desktop
+  name: docker-desktop
+current-context: docker-desktop
+kind: Config
+preferences: {}
+users:
+- name: docker-desktop
+  user:
+    client-certificate-data: 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
+    client-key-data: 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

examples/dotfiles/.oci/config

@@ -0,0 +1,13 @@
+################################################################################
+## ~/.oci/config
+##
+## Sources:
+## - https://docs.oracle.com/en-us/iaas/Content/API/Concepts/sdkconfig.htm
+################################################################################
+
+[DEFAULT]
+user=ocid1.user.oc1..aaaaaaaayap6nsl77k2u34v2k7t47uidv27qfhv43av7ryn2xp37tezezlha
+fingerprint=aa:bb:cc:dd:ee:ff:00:11:22:33:44:55:66:77:88:99
+key_file=/home/user/.oci/oci_api_key.pem
+tenancy=ocid1.tenancy.oc1..aaaaaaaawtuhnzgr175bto5wmddky4nqorr9txnjxugmtrcsoatsbv4nn6qt4
+region=eu-amsterdam-1

examples/dotfiles/.screenrc

@@ -0,0 +1,15 @@
+################################################################################
+## ~/.screenrc
+################################################################################
+
+defscrollback 1000000
+hardstatus alwayslastline
+hardstatus string '%{gk}[%{G}%H%{g}][%= %{wk}%?%-Lw%?%{=b kR}(%{W}%n*%f %t%?(%u)%?%{=b kR})%{= kw}%?%+Lw%?%?%= %{g}]%{=b C}[%m/%d/%y %C %A]%{W}'
+logfile flush
+logtstamp after 1
+logtstamp on
+shell -$SHELL
+startup_message off
+termcapinfo xterm ti@:te@
+termcapinfo xterm-color ti@:te@
+vbell off

examples/dotfiles/.tmux.conf

@@ -0,0 +1,51 @@
+################################################################################
+## ~/.tmux.conf
+################################################################################
+
+###
+# Tmux behavior
+#################
+
+set -g xterm-keys on
+
+# scrollback size
+set -g history-limit 100000
+
+# enable mouse control (clickable windows, panes, resizable panes)
+set -g mouse on
+
+
+###
+# Tmux visuals
+#################
+
+set -g default-terminal "screen-256color"
+set -g status-right '#H %Y-%m-%d %H:%M'
+
+
+###
+# Window visuals
+##################
+
+# renumber windows when one is closed
+set -g renumber-windows on
+
+# set the terminals' title
+set -g set-titles on
+
+# rename a window to the current program
+set-window-option -g automatic-rename on
+
+
+###
+# Activity monitor
+####################
+
+# highlight the active window
+# set-window-option -g window-status-current-style 'bg=red dim'
+
+# highlight a window's tab when it has activity
+set -g monitor-activity on
+
+# notify of a window's activity in the status bar
+set -g visual-activity on

examples/dotfiles/.tool-versions

@@ -0,0 +1,19 @@
+################################################################################
+## ~/.tool-versions
+##
+## Only versions or "system" are supported here, not "latest".
+## Put the version to use as default first, followed by all fallback versions
+## in order.
+##
+## Sources:
+## - https://asdf-vm.com/manage/configuration.html#tool-versions
+################################################################################
+
+python 3.11.0 system 3.10.7 3.9.7
+ruby 2.7.7 system
+
+azure-cli system 2.40.0
+terraform 1.2.9 1.3.7 system
+
+hadolint 2.12.0
+shellcheck 0.8.0

examples/dotfiles/.vimrc

@@ -0,0 +1,113 @@
+""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+"" ~/.vimrc
+""
+"" Sources:
+"" - http://vimdoc.sourceforge.net/htmldoc/filetype.html
+""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
+
+" Attempt to determine the type of a file based on its name and possibly its
+" contents.
+" Allow intelligent auto-indenting for each filetype, and for plugins that are
+" filetype specific.
+filetype indent plugin on
+
+" Enable syntax highlighting.
+syntax on
+
+" Display line numbers on the left-hand side.
+set number
+
+" Highlight the line underneath the cursor.
+set cursorline
+
+" Highlight the column underneath the cursor.
+" set cursorcolumn
+
+" Highlight matching brackets.
+set showmatch
+
+" Show typed partial commands in the last line of the screen.
+set showcmd
+
+" Show the mode you are on the last line.
+" set showmode
+
+" Display the cursor position on the last line of the screen or in the status
+" line of a window.
+set ruler
+
+" Use visual bell instead of beeping when doing something wrong.
+set visualbell
+
+" Raise a dialogue asking if you wish to save changed files instead of failing a
+" command because of unsaved changes.
+set confirm
+
+" Do not redraw the screen during important tasks.
+" Leads to smoother and faster macros.
+set lazyredraw
+
+""""""""""""""""""""""""""""""""""""""""
+" Search.
+""""""""""""""""""""""""""""""""""""""""
+
+" Ignore capital letters during search.
+set ignorecase
+
+" Override the ignorecase option if searching for capital letters.
+" This allows to search specifically for capital letters.
+set smartcase
+
+" Highlight during a search.
+set hlsearch
+
+" Highlight matching characters as you type while searching though a file
+" incrementally.
+set incsearch
+
+" Show matching words during a search.
+set showmatch
+
+""""""""""""""""""""""""""""""""""""""""
+" Indentation.
+""""""""""""""""""""""""""""""""""""""""
+
+" Copy indentation from the current line when starting a new line
+set autoindent
+
+" Adjust indentation on special events (e.g. after a bracket start)
+set smartindent
+
+" Insert spaces instead of a tab
+set expandtab
+
+" Draw a tab as 4 spaces
+set tabstop=4
+
+" Number of spaces to use for each (auto)indent step
+set shiftwidth=4
+
+" Number of spaces the cursor moves right when a Tab is inserted and moves left
+" when Backspace is used to erase a tab.
+" A negative value sets it to fall back to the value of 'shiftwidth'
+set softtabstop=-1
+
+" Overrides for shell files
+" Use tabs for indentation instead of spaces
+autocmd Filetype sh setlocal softtabstop=0 noexpandtab
+
+""""""""""""""""""""""""""""""""""""""""
+" Line wrap
+""""""""""""""""""""""""""""""""""""""""
+
+" Paint the background of the 81st character to draw a vertical indicator.
+set colorcolumn=81
+
+" Make it black in Graphical Vim.
+" See :help gui-colors for a list of suggested color names.
+" See :help guibg for how to specify specific rgb/hex colors.
+highlight ColorColumn guibg=Black
+
+" Make it dark grey in terminal vim.
+" See :help cterm-colors for a list of colors that can be used in the terminal.
+highlight ColorColumn ctermbg=DarkGrey

examples/dotfiles/.zshenv

@@ -0,0 +1,94 @@
+################################################################################
+## ~/.zshenv
+##
+## This file is sourced by *all* zsh shells on startup.
+################################################################################
+
+########################################
+# Ensure primary XDG variables are set.
+########################################
+
+: "${XDG_CONFIG_HOME:=${HOME}/.config}"
+: "${XDG_CACHE_HOME:=${HOME}/.cache}"
+: "${XDG_DATA_HOME:=${HOME}/.local/share}"
+: "${XDG_STATE_HOME:=${HOME}/.local/state}"
+: "${XDG_DATA_DIRS:=/usr/local/share:/usr/share}"
+: "${XDG_CONFIG_DIRS:=/etc/xdg}"
+
+########################################
+# Basic utility aliases and functions.
+#
+# Used to simplify checks later.
+# Needed in all shells.
+# Ordered alphabetically and by dependencies.
+########################################
+
+alias disable-xtrace='unsetopt xtrace'
+alias enable-xtrace='setopt xtrace'
+alias is-shell-interactive='[[ -o interactive ]]'
+alias is-shell-login='[[ -o login ]]'
+
+# Print the whole current environment.
+alias printallenv='setopt posixbuiltins && set'
+
+to-lower () {
+	echo "${1:l}"
+}
+
+to-upper () {
+	echo "${1:u}"
+}
+
+is-true () {
+	# Needs to return 0 or 1 and not `true` or `false`.
+	# Input's case is lowered to save on match options.
+
+	local LOWERED_INPUT="$(to-lower "$1")"
+	[[ "$LOWERED_INPUT" =~ '^1|on|true|yes$' ]]
+}
+
+# Make PATHs' entries unique for better performances.
+typeset -aU {f,info,man,}path
+
+########################################
+# Shell configuration.
+#
+# https://zsh.sourceforge.io/Doc/Release/Options.html
+########################################
+
+# Require 'cd' to change directory.
+unsetopt auto_cd
+
+########################################
+# Utility aliases and functions.
+#
+# Ordered and grouped by dependencies.
+########################################
+
+alias decomment='grep -Ev "^#|^$"'
+
+alias please='sudo'
+
+########################################
+# Applications' settings and shortcuts.
+########################################
+
+####################
+# Python.
+####################
+
+# See also:
+# - https://docs.python.org/3/using/cmdline.html#environment-variables
+
+PYTHONCACHE=1
+
+####################
+# GnuPG.
+####################
+
+# Integrate with the SSH agent.
+export SSH_AUTH_SOCK="$(/opt/homebrew/bin/gpgconf --list-dirs 'agent-ssh-socket')"
+/opt/homebrew/bin/gpgconf --launch 'gpg-agent'
+
+# Integrate with Pinentry.
+export GPG_TTY="$(tty)"

examples/dotfiles/.zshrc

@@ -0,0 +1,186 @@
+################################################################################
+## ~/.zshrc
+##
+## This file is sourced by all *interactive* zsh shells on startup, including
+## some apparently interactive shells such as scp and rcp that can't tolerate
+## any output.
+## Make sure this doesn't display anything or bad things will happen!
+##
+## It is recommended to make language settings in ~/.zprofile rather than here,
+## since multilingual X sessions would not work properly if LANG is overridden
+## in every subshell.
+################################################################################
+
+# Enable this and the last line to debug performance.
+# zmodload zsh/zprof
+
+########################################
+# Shell configuration.
+# Sane defaults that could easily be overridden later.
+########################################
+
+# If a pattern for filename generation has no matches, print an error instead of
+# leaving it unchanged in the argument list.
+# This also applies to file expansion of an initial '~' or '='.
+setopt no_match
+
+# Treat '#' as a comment starter instead of matching patterns.
+setopt interactive_comments
+
+# Remind compinstall where it wrote zstyle statements last time.
+# This lets one run compinstall again to update them.
+zstyle ':compinstall' filename ~/.zshrc
+
+# Automatically update completions after PATH changes.
+zstyle ':completion:*' rehash true
+
+# Enable cache for completions.
+zstyle ':completion:*' use-cache true
+
+# Load extensions.
+autoload -Uz bashcompinit compinit promptinit
+
+# Enable completions.
+bashcompinit
+compinit
+
+# Enable prompt management.
+promptinit
+
+# Automatically logout after 60 minutes of inactivity.
+export TMOUT="3600"
+
+####################
+# History management.
+####################
+
+# The file to save the history into when an interactive shell exits.
+# If unset, the history is not saved.
+: "${HISTFILE:=$HOME/.zsh_history}"
+
+# Set the number of lines or commands allowed in the history file
+SAVEHIST=50000
+
+# Set the number of lines or commands stored in memory as history list during an
+# ongoing session
+HISTSIZE=100000
+
+# Append the session's history list to the history file, rather than replace it.
+# Multiple parallel sessions will all have the new entries from their history
+# lists added to the history file, in the order that they exit. The file will
+# still be periodically re-written to trim it when the number of lines grows 20%
+# beyond the value specified by $SAVEHIST
+setopt append_history
+
+# When searching for history entries in the line editor, do not display
+# duplicates of a line previously found
+# setopt hist_find_no_dups
+
+# If a new command line being added to the history list duplicates an older one,
+# the older command is removed from the list
+setopt hist_ignore_all_dups
+
+# Remove command lines from the history list when the first character on the
+# line is a space, or when one of the expanded aliases contains a leading space.
+# Only normal aliases (not global or suffix aliases) have this behavior. Note
+# that the command lingers in the internal history until the next command is
+# entered before it vanishes, allowing you to briefly reuse or edit the line.
+# If you want to make it vanish right away without entering another command,
+# type a space and press return
+setopt hist_ignore_space
+
+# Remove superfluous blanks from each command line being added to the history
+setopt hist_reduce_blanks
+
+# Omit older commands duplicating newer ones when writing out the history file
+# setopts hist_save_no_dups
+
+# Whenever the user enters a line with history expansion, perform history
+# expansion and reload the line into the editing buffer instead of executing it
+setopt hist_verify
+
+########################################
+# Utility aliases and functions.
+#
+# Ordered and grouped by dependencies.
+########################################
+
+####################
+# History management.
+####################
+
+alias redo='$(history -p !!)'
+alias sedo='sudo $(history -p !!)'
+
+########################################
+# Applications settings and shortcuts.
+########################################
+
+# Set the default editor.
+export EDITOR="/usr/bin/vim"
+
+# Enable colors.
+alias grep='grep --color=always'
+alias ls='ls -G'
+
+####################
+# SSH.
+####################
+
+alias ssh-load-keys='eval `ssh-agent` && ssh-add'
+
+####################
+# Kubernetes.
+####################
+
+alias kubectl-current-context='kubectl config current-context'
+
+kubectl-decode () { echo "$1" | base64 -d ; }
+kubectl-encode () { echo -n "$1" | base64 ; }
+
+kubectl-nodes-with-issues () {
+	kubectl get nodes -o jsonpath='{.items[]}' \
+	| jq '
+		{
+			"node": .metadata.name,
+			"issues": [
+				.status.conditions[] | select(
+					.status != "False" and
+					.type != "Ready"
+				)
+			]
+		} | select( .issues|length > 0 )
+	' -
+}
+alias kubectl-nodes-with-issues-in-yaml='kubectl-nodes-with-issues | yq -y "." -'
+
+# Reassign the expected behaviour to the delete, end and home keys.
+bindkey "^[[3~" delete-char
+bindkey "^[[F"  end-of-line
+bindkey "^[[H"  beginning-of-line
+
+########################################
+# Configuration freeze.
+# Finalize customizations and try to set the current configuration immutable.
+########################################
+
+# Clean up PATHs.
+# Remove non-existing directories, follow symlinks and clean up remaining paths.
+if command which realpath >/dev/null 2>&1
+then
+	[[ -n "${fpath[@]}" ]]    && fpath=(    $(realpath -q ${fpath[@]})    )
+	[[ -n "${infopath[@]}" ]] && infopath=( $(realpath -q ${infopath[@]}) )
+	[[ -n "${manpath[@]}" ]]  && manpath=(  $(realpath -q ${manpath[@]})  )
+	[[ -n "${path[@]}" ]]     && path=(     $(realpath -q ${path[@]})     )
+fi
+
+# Freeze (-f) or unfreeze (-u) the tty. When the tty is frozen, no changes made
+# to the tty settings by external programs will be honored by the shell, except
+# for changes in the size of the screen; the shell will simply reset the
+# settings to their previous values as soon as each command exits or is
+# suspended.
+# Freezing the tty only causes future changes to the state to be blocked.
+ttyctl -f
+
+# Enable this and the module inclusion on the first line to debug performance.
+# zprof